Re: Useful 3D printed parts for the Exos-2


Heh...    :-)
I don't like that velcro strap, either.  Much too inclined to sneak down the leg and past the spreader, with my PMC-8 sliding towards the ground while the legs are shifting around, as I level the mount.  
The plan (it's on my list...) is to put a wooden block on the spreader, with the aluminum wedge attached to its side, such that the PMC-8 box is held vertically, off the side of the spreader, and well above the ground.   
- Bob

Join to automatically receive all group messages.