toggle quoted messageShow quoted text
If someone can tell me the G11 leg diameter I’d be happy to add a variation to my 2” EXOS 2 3D design that I published yesterday.
On Sep 27, 2018, at 7:16 PM, Winfield Moses via Groups.Io <chris_moses@...
I fully agree. That is the only piece of the G-11 that seems sub-par. Beside the sinking movement, I want everything on my mount ROCK SOLID. Cables, cameras, etc....all the way down to the little things.
I was in a hurry. I just used some of that quick drying clay-like stuff . Molded it around the leg and then flattened the other side. I keep meaning to measure the diameter and then 3d print a better solution. If anyone knows the OD, let me know and I'll give it a shot.
On Thursday, September 27, 2018, 7:07:40 PM EDT, Robert Hoskin <devonshire@...
I don't like that velcro strap, either. Much too inclined to sneak down the leg and past the spreader, with my PMC-8 sliding towards the ground while the legs are shifting around, as I level the mount.
The plan (it's on my list...) is to put a wooden block on the spreader, with the aluminum wedge attached to its side, such that the PMC-8 box is held vertically, off the side of the spreader, and well above the ground.