Re: iEXOS 100 PMC-EIGHT Issues #ExploreScientific #iEXOS-100


Harry
 

Chris,

I also had an issue with the left/right movement in regards to the knob under the mount not tightening 
enough. The bolt/knob is bottoming out in the mount housing, thus not permitting a tight fit.
I carefully removed the c clip/retaining clip that holds the knob/bolt assembly in the mount base. Be 
careful to support it from the bottom, as the bolt and washers will fall out. They are in a certain order
on the bolt to provide some spring resistance. I then added @ a 3/4 or 1 inch diameter washer (as long as it fits within the circular base)  to the bolt assembly sticking up thru the mount base. Added a slightly larger diameter c clip/retainer clip to hold it all together, and now it snugs up as much as you want. Bolt diameter is 1/4 inch for the new clip.

Hope this helps.
--
Harry
Vero Beach, FL
Scopes: ES AR102,  Meade ETX 90 EC (Deforked)
Mounts: ES iExos 100-PMC Eight, ExploreStars IPAD & Fire HD8,
Oberwerk 5000 Tripod, Binos: Oberwerk 15x70, 8x40

Join MAIN@ESPMC-Eight.groups.io to automatically receive all group messages.