Re: New PCM-8 Upgrade testing


W. Christopher Moses
 

It sounds, to me, like one of two things: either your zero position was inaccurate or your location was not set correctly.

You can test the zero position by parking the scope. If it doesn't go back to a "straight up and down" position, and the bubble levels on the RA and DEC aren't level, then your zero position is off.  Just loosen the clutches and adjust it, while parked.

I would double check your location manually. Click on the icon in the upper left and select settings.

Join MAIN@ESPMC-Eight.groups.io to automatically receive all group messages.