Re: Exos II Mount cannot connect after running pmc8.exe #EXOS2

Wes Mcdonald


Also there are many who are using the asi air.  They post and reply on the applications subgroup.  So if you get stuck with the asi air post there.  Those guys know what to do.  The rest of us maybe not so much... and that is where posts for non pmc8 should go anyhow.

Of course you can post questions about the pmc8 on any of the other subgroups.  

Also if you want to load new firmware you don’t have to switch the pmc8 to serial.  But you do need the ftdi usb to serial and the driver.  Then you c an just use the CM directly to load firmware and go from there. 

Welcome to the forum!


Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired

Join to automatically receive all group messages.