Re: #pmc-eight #EXOS2 #UFCT #UniversalFirmware Any way to add a 'default to ES 'Ad-hoc' settings file' for the RN-131 wifi unit as part of the firmware update suit? #EXOS2 #pmc-eight #UniversalFirmware #UFCT

Jerry Hubbell - Explore Scientific VP Engineering

On Mon, Apr 26, 2021 at 10:44 AM, Karl wrote:
If you're unable to connect to the PMC8 via WiFi, you have to open it up and clip IO9 pin to VDD.  My recollection is doing it once launches the web server ad hoc network and interface, which you can use to switch back to ad hoc mode, probably without having to reset it at all.  The reset involves clipping/unclipping the connection (running it hi/low) a number of times in succession (I think five times, each about a second apart, but I don't recall for sure).  If you go the reset route, the instructions I used to get back to the ES defaults are on pages 42-43 of the programmers reference:  
I must warn everyone who tries this, you do this at your own risk. If you cause your board to fail this is not covered under warranty.
Jerry Hubbell
Vice President of Engineering

Explore Scientific, LLC.
jrh at
1010 S. 48th Street
Springdale, AR 72762

Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
             Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home

Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Wilderness, VA
: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras:  QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating

Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!

Join to automatically receive all group messages.