Date   

Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Wes Mcdonald
 

After
--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Bob Trepiccione
 

I seem to recall seeing a couple errors when I installed, too.

Try it out, those errors might not necessarily mean it won't work.

Think positively...



Sent from my T-Mobile 4G LTE Device


-------- Original message --------
From: Paul Meesters <p.h.meesters@...>
Date: 10/17/20 2:50 PM (GMT-05:00)
To: MAIN@ESPMC-Eight.groups.io
Subject: Re: [ESPMC-Eight] Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

I did find the 6.4 installer on Github, and installed it on a fresh Windows 10 laptop (hp pavilion).
The install succeeded but with 2 errors in the diagnostics with no indication of what to do to repair it :(

20:31:45.482 Error                     Error List
20:31:45.482 Error                     AstroUtilTests - ##### NOT Matched - DeltaUT value: -1,37904405763513 is outside the range: -1 to 1
20:31:45.482 Error                     AstroUtilTests - ##### NOT Matched - DeltaUT1 - Today value: -1,37904405875108 is outside the range: -0,9 to 0,9
 
Don't know why everything I do seems to end in disappointments
 


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Paul Meesters
 

I did find the 6.4 installer on Github, and installed it on a fresh Windows 10 laptop (hp pavilion).
The install succeeded but with 2 errors in the diagnostics with no indication of what to do to repair it :(

20:31:45.482 Error                     Error List
20:31:45.482 Error                     AstroUtilTests - ##### NOT Matched - DeltaUT value: -1,37904405763513 is outside the range: -1 to 1
20:31:45.482 Error                     AstroUtilTests - ##### NOT Matched - DeltaUT1 - Today value: -1,37904405875108 is outside the range: -0,9 to 0,9
 
Don't know why everything I do seems to end in disappointments
 


Re: PHD2 stopped talking to my mount #EXOS2 #OpenGOTO #pmc-eight #ASCOM

James
 

Jerry,

Yeah, that makes sense. Now that it looks like I got ASCOM and PHD2 running, though I need to see if it will calibrate, hopefully tracking will work now that it's running over serial.

With that out of he way, hopefully, what's the best way locate and slew to objects when using PHD2 and APT? I tried installing ExploreStars on my laptop but it seems to get stuck at "please wait".

Thanks

--
Mounts: Explore Scientific EXOS II GT, iEXOS-100, Celestron AVX
Scope: Explore Scientific AR102, AR152, FirstLight 152mm Mak-Cassegrain, SpaceCat 51
Guide Scope: Astromania 50mm Guidescope (190mm focal length)
Guide Camera: ZWO ASI120MM Mini Monochrome
Camera: Canon RP (IR modification)
Software: PHD2, ASCOM, and APT


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Bob Trepiccione
 

Forgot the link, sorry ..


https://github.com/ASCOMInitiative/ASCOMPlatform/releases/tag/Build_2695


Sent from my T-Mobile 4G LTE Device


-------- Original message --------
From: Paul Meesters <p.h.meesters@...>
Date: 10/17/20 1:46 PM (GMT-05:00)
To: MAIN@ESPMC-Eight.groups.io
Subject: Re: [ESPMC-Eight] Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

[Edited Message Follows]

Wes,

This is getting way too complicated and technical for me :(.
Thanks for trying though :)


EDIT: 
Uninstall ascom.  Install ascom 6.4, not 6.5
I would not know where to get an older version of the Ascom platform. On https://ascom-standards.org/ I can't find anything. That download-center is a weird place, and not meant for mortal men it seems.


Thanks,
Paul.


Re: PHD2 stopped talking to my mount #EXOS2 #OpenGOTO #pmc-eight #ASCOM

Jerry Hubbell - Explore Scientific VP Engineering
 

On Sat, Oct 17, 2020 at 12:12 PM, James Everson wrote:
However, when I tried to slew N
You must realize that you cannot move north from the north celestial pole. All directions are south. You cannot move east or west either away from the north celestial pole (NCP)
 
--
Jerry Hubbell
Vice President of Engineering

Explore Scientific, LLC.
jrh at explorescientific.com

www.explorescientificusa.com
1010 S. 48th Street
Springdale, AR 72762
1-866-252-3811

Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
             Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home


Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Wilderness, VA
Mounts
: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras:  QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating

Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Bob Trepiccione
 

Hi Paul,

Here's a link to download 6.4

Scroll down to "assets" and you'll find the download.

Uninstalling 6.5 and Installing 6.4 solved all my issues...

Hope it helps.




Sent from my T-Mobile 4G LTE Device


-------- Original message --------
From: Paul Meesters <p.h.meesters@...>
Date: 10/17/20 1:46 PM (GMT-05:00)
To: MAIN@ESPMC-Eight.groups.io
Subject: Re: [ESPMC-Eight] Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

[Edited Message Follows]

Wes,

This is getting way too complicated and technical for me :(.
Thanks for trying though :)


EDIT: 
Uninstall ascom.  Install ascom 6.4, not 6.5
I would not know where to get an older version of the Ascom platform. On https://ascom-standards.org/ I can't find anything. That download-center is a weird place, and not meant for mortal men it seems.


Thanks,
Paul.


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Paul Meesters
 
Edited

Wes,

This is getting way too complicated and technical for me :(.
Thanks for trying though :)


EDIT: 
Uninstall ascom.  Install ascom 6.4, not 6.5
I would not know where to get an older version of the Ascom platform. On https://ascom-standards.org/ I can't find anything. That download-center is a weird place, and not meant for mortal men it seems.


Thanks,
Paul.


Re: PHD2 stopped talking to my mount #EXOS2 #OpenGOTO #pmc-eight #ASCOM

James
 

OK. So it appears the it is moving.

Starting point:


End point:


After running this test I discovered something that I hope isn't an issue. This is what I ran into.

1. Set the position indicators back to the starting position. Set POTH to move 30 degrees per slew. E and W slew worked fine. However, when I tried to slew N, the log says it moved, but it didn't. I then tried to slew S and that worked. Then I tried to slew N again, and it did, returning back to where I started. I then tried to slew from the starting point again, it says it moved, but it didn't. The mount is balanced. I triple checked that.

Thanks
--
Mounts: Explore Scientific EXOS II GT, iEXOS-100, Celestron AVX
Scope: Explore Scientific AR102, AR152, FirstLight 152mm Mak-Cassegrain, SpaceCat 51
Guide Scope: Astromania 50mm Guidescope (190mm focal length)
Guide Camera: ZWO ASI120MM Mini Monochrome
Camera: Canon RP (IR modification)
Software: PHD2, ASCOM, and APT


Re: Dec axis motor system faulty or newbie error?? #EXOS2

 

Paul,

You're most welcome !   Glad it got sorted out.  :-)

- Bob

On Sat, Oct 17, 2020, at 09:22, Paul Mogg wrote:
Well I fixed it, took me while as I'm not used to doing any mechanical stuff, and finding the right hex keys etc. but it was exactly as Robert had predicted, both of the set screws holding the large pulley in place on the DEC motor assembly were completely loose on their spindle, so the motor was turning but it wasn't turning the head.

Many thanks again to Robert for his help and instruction sheet, and to Tony for his helpful suggestions.

Paul

--
Location: southern Spain

Equipment:
Explore Scientific EOS-2 PMC-Eight mount
Skywatcher 200DPS Newtonian telescope
Telrad.
28mm 2" and 12mm 1.25" lenses.
2 and 5 x Barlows.
Macbook air 
Huawei Android T5 Tablet
Nikon D3200 DSLR
Software: ExploreStars Android & WIndows, Stellarium OSX & Android, AstroDSLR


--
Mounts: ES PMC-8 EXOS2
Scopes: SV 102EDT, ZWO 60/280 Guide
Cameras:  Nikon D5300, Altair GPCAM2 290M
Software: ASCOM, CdC, AstroTortilla, BYN Pro, Sharpcap, PHD2
Computer:  Thinkpad x230, Win7Pro/64


Re: PHD2 stopped talking to my mount #EXOS2 #OpenGOTO #pmc-eight #ASCOM

Doug Walker <espmc8@...>
 

Are the RA-Dec or Alt-Az numbers displayed in POTH moving as I described. This seems like it might be working. For an aiudible verification, do the 5000 pulse guide a bunch of times then park the mount, you should hear it move back.

On 10/17/2020 11:10 AM, James Everson wrote:
Doug,
I followed your steps. ASCOM connected over serial. POTH connected to PMC8. POTH controls move the mount. Connected PHD2 to POTH driver (camera also connected). Using the manual controls don't "appear" to move the mount, but the requests are logged by POTH.
Connected: True -> True (no change)
Name: POTH->Explore Scientific PMC-Eight ASCOM Driver
CanPulseGuide: True
CanSlew: True
CanSlewAsync: True
Declination: +89:50:30
SideOfPier: West
Slewing:  False  IsPulseGuiding:  False
PulseGuide: North, 5000: (done)
IsPulseGuiding:  False  Slewing:  False  IsPulseGuiding:  False
PulseGuide: South, 5000: (done)
IsPulseGuiding:  False  Slewing:  False  IsPulseGuiding:  False
PulseGuide: East, 5000: (done)
IsPulseGuiding:  False  Slewing:  False  IsPulseGuiding:  False
PulseGuide: West, 5000: (done)
IsPulseGuiding:  False
This is using the original cable I have (non-FTLD). As you see, there are a lot of "False" messages here. Not sure if that is normal or not.
Thanks
--
Mounts: Explore Scientific EXOS II GT, iEXOS-100, Celestron AVX
Scope: Explore Scientific AR102, AR152, FirstLight 152mm Mak-Cassegrain, SpaceCat 51
Guide Scope: Astromania 50mm Guidescope (190mm focal length)
Guide Camera: ZWO ASI120MM Mini Monochrome
Camera: Canon RP (IR modification)
Software: PHD2, ASCOM, and APT
--
Explore Scientific iEXOS-100
Canon T1i (no mod)
Canon 18-55mm zoom lens
Canon 75-300mm zoom lens
Astromania 60mm guidescope
ZWO ASI 120MC-S
Lenovo m93 / Win10Pro
NINA, DSS, SiriL, GIMP, Phd2


Re: PHD2 stopped talking to my mount #EXOS2 #OpenGOTO #pmc-eight #ASCOM

James
 

Doug,

I followed your steps. ASCOM connected over serial. POTH connected to PMC8. POTH controls move the mount. Connected PHD2 to POTH driver (camera also connected). Using the manual controls don't "appear" to move the mount, but the requests are logged by POTH.



Connected: True -> True (no change)
Name: POTH->Explore Scientific PMC-Eight ASCOM Driver
CanPulseGuide: True
CanSlew: True
CanSlewAsync: True
Declination: +89:50:30
SideOfPier: West
Slewing:  False  IsPulseGuiding:  False
PulseGuide: North, 5000: (done)
IsPulseGuiding:  False  Slewing:  False  IsPulseGuiding:  False
PulseGuide: South, 5000: (done)
IsPulseGuiding:  False  Slewing:  False  IsPulseGuiding:  False
PulseGuide: East, 5000: (done)
IsPulseGuiding:  False  Slewing:  False  IsPulseGuiding:  False
PulseGuide: West, 5000: (done)
IsPulseGuiding:  False

This is using the original cable I have (non-FTLD). As you see, there are a lot of "False" messages here. Not sure if that is normal or not.

Thanks


--
Mounts: Explore Scientific EXOS II GT, iEXOS-100, Celestron AVX
Scope: Explore Scientific AR102, AR152, FirstLight 152mm Mak-Cassegrain, SpaceCat 51
Guide Scope: Astromania 50mm Guidescope (190mm focal length)
Guide Camera: ZWO ASI120MM Mini Monochrome
Camera: Canon RP (IR modification)
Software: PHD2, ASCOM, and APT


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

jrichard333 <jrichard333@hotmail.com>
 

Good day all,

 

I would suggest using the following website:  https://telescopius.com/?fromdsobrowser

 

No guess work on what’s up and when it goes down.

 

JR

 

 

From: MAIN@ESPMC-Eight.groups.io [mailto:MAIN@ESPMC-Eight.groups.io] On Behalf Of Patrick Maher via groups.io
Sent: Friday, October 16, 2020 4:31 PM
To: MAIN@ESPMC-Eight.groups.io
Subject: Re: [ESPMC-Eight] Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

 

I agree with you about finding objects that aren't solar system objects or Messier objects.  This, in my opinion, is a weak area of the app.  What if someone doesn't know the names of things to view?  Wouldn't it be better if we could at least scroll through a list of viewable objects in the sky at the moment?  Obviously, a more graphical interface like we have for the Messier objects and the Solar System objects would be even better but just a list would be okay.  Maybe add-on packs for the app? 

I also use a Surface tablet with ExploreStars and I have no problems so there must be something wrong with your particular tablet/OS or you are doing something wrong (which is easy to do and expected for someone new to the system).  

As far as your other problem, it sounds like you might be losing connection with the mount.  The obvious reason is because you have your tablet set to "Always Connect to this Device" for your home's Wifi.  You must uncheck that option.  Even better, set your mount's Wifi to "Always Connect..."  

My guess is that will resolve the connection issue.

Patrick
--
Explore Scientific iEXOS-100 and EXOS-2GT (non-PMC)
Explore Scientific ED 102mm Refractor


Re: Dec axis motor system faulty or newbie error?? #EXOS2

Paul Mogg
 

Tony, I got to the Orion Nebula using just the Telrad ( which is an amazing tool ) and loosened clutches, which is how I'd been it before getting the EXOS-2 PCM-8. I started about a month or so age using an old video tripod I had, with my Newtonian, but quickly realized that doesn't cut it for astronomy, it's down right dangerous frankly, the whole shebang nearly fell on me a few times. So anyway, the EXOS-2 is a big step up for me.
--
Location: southern Spain

Equipment:
Explore Scientific EOS-2 PMC-Eight mount
Skywatcher 200DPS Newtonian telescope
Telrad.
28mm 2" and 12mm 1.25" lenses.
2 and 5 x Barlows.
Macbook air 
Huawei Android T5 Tablet
Nikon D3200 DSLR
Software: ExploreStars Android & WIndows, Stellarium OSX & Android, AstroDSLR


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Wes Mcdonald
 

Paul 

The RN 131 G which is in the unit has a spec sheet operating temperature -30 to +85 (C) so don’t sweat the temperature.  Also, in case you are still worried that 5C is a problem realize the thing self heats also while operating.  Self heat also likely prevents moisture from forming on it.  Finally the thing is pretty much sealed up in an RF enclosure.


You are looking in the wrong places for a problem.  Barring that your unit is somehow defective, a thesis that its operational capability with WiFi is demonstrated, all of your problems stem from your windows machine.  I have said this many times, the pmc8 is a relatively simple machine — compared to a PC it is the smallest bump on the smallest wart in the smallest code module in windows operating system.   

I don’t know if anyone on the forum that had been unable to get things up and running.  

I had issues also.  In the end they all were related in someway to the windows tablet I had.     Everything works fine on two bootcamped macs and in dell laptop.   Same stuff didn’t work correctly in the the tablet.   Go figure.

So you just have to clear the decks and start over.  Start simple.  Uninstall ascom.  Install ascom 6.4, not 6.5.  Run the ascom diagnostics.  It must complete with no errors.  Reinstall the Es ascom driver, any cpu version.   Get the ftdi cable.  Load the ftdi usb-serial driver for the device.  Check with windows device manager to see if the adapter is working.  Load the configuration manager.  Connect to the pmc8 WiFi and using the cm switch the pmc8 to serial.  Using the configuration manager check that it responds to the ESGv! Command.  If so serial is working. If not suspect the usb serial cable/driver/chip set.  Boot poth.  Configure the ascom driver to the comm port and communication mode.  Connect poth to the mount.  See does the ra and dec values go to 90 and something around 0, can be off by a few hours in ra.   Use the poth keys to move the mount and see that the position in ra and dec as reported in poth are changing.  If all this works Ascom is up and running with the mount.

At that point the rest is just using other applications with their own stuff you have to figure out.  

Remember to connect ascom driver to the mount and every other ascom compliant software to Poth. 

If you are having issues with poth not moving the mount via an st4 cable while using explorestars there are a few possibilities.  Remember to tell PhD that guiding is to be done on camera, pick this in the mounts drop box in phd profile manager.  The st4 interface may have an issue with your particular guided camera that is easily fixed but requires you to run the unit in diagnostic mode.  So check out all above and get back to us. If all works but guiding via st4 does not then diagnostic mode test will be the next step.

There is an issue with connecting to WiFi that cropped up with a windows update.  The only known work around we have is to set the network adapter to static IP address.   I have put a .bat file in the files section of the Mounts subgroup that will do this for you.  So if your PC is not connecting to the wifi module while in DHCP mode use the bat file to switch it.

Finally, if you have issues with WiFi dropping it is possible the WiFi is not configured correctly. After you establish that every other thing about WiFi is correct we can look into that.  But make sure the WiFi advice others have given you is all followed and the static mode switch does. It fix the problem 

Wes

--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: Dec axis motor system faulty or newbie error?? #EXOS2

Paul Mogg
 

Well I fixed it, took me while as I'm not used to doing any mechanical stuff, and finding the right hex keys etc. but it was exactly as Robert had predicted, both of the set screws holding the large pulley in place on the DEC motor assembly were completely loose on their spindle, so the motor was turning but it wasn't turning the head.

Many thanks again to Robert for his help and instruction sheet, and to Tony for his helpful suggestions.

Paul

--
Location: southern Spain

Equipment:
Explore Scientific EOS-2 PMC-Eight mount
Skywatcher 200DPS Newtonian telescope
Telrad.
28mm 2" and 12mm 1.25" lenses.
2 and 5 x Barlows.
Macbook air 
Huawei Android T5 Tablet
Nikon D3200 DSLR
Software: ExploreStars Android & WIndows, Stellarium OSX & Android, AstroDSLR


Re: Dec axis motor system faulty or newbie error?? #EXOS2

James Ball
 

If you have just the bare mount, not scope or counterweights, does it seem to move correctly with only the high pitch noise of the motors and no clicking or grinding?
--
James Ball
Dawson Springs, Ky
Mounts: iEXOS-100
Scopes: Meade ETX90RA(deforked now) Sky Watcher 150MCT
Camera: ZWO ASI 120MC-S
Software: Explore Stars Android, ASCOM, Stellarium Scope, Stellarium, AS!3, SharpCap, RegiStax6.


Re: Dec axis motor system faulty or newbie error?? #EXOS2

Tony
 

You're shooting with a 200mm newt, correct?  That's similar to my setup.  Are you sure your scope is well balanced with the camera and accessories attached?  It sounds like the motor may be straining.  The mount should be plenty strong enough to move a big newt, so long as its well balanced.  Sorry if  this seems like an obvious point, I just want to make sure.

How were you able to get to the Orion Nebula?  Did you use explore stars and slew to the target?  Were you platesolving in APT?  Or did you loosen the clutches and point the scope manually?

Also, if you were able to get the scope on target (M42) the DEC motor should be essentially still.  Only the RA motor would be turning to counteract the earth's rotation.  If you got star trails at 30 seconds, and assuming you had good polar alignment, it sounds like the RA axis is not turning.  Perhaps you have them confused?  Or perhaps both are straining? 

Please don't take any offense if my questions seem too rudimentary, I'm just trying to understand and confirm things. Hopefully you'll get some answers from Support soon.


On 10/17/2020 1:41 AM, Paul Mogg wrote:
Yes I did that Tony, nothing to see, the belt is in place, the cogs turn. Unfortunately the Dec motor system started making a loud repetitive click last night as I suppose it is trying to track but can't. I tried taking my first pics of the Orion nebula last night but just got long star trails with a 30 sec exposure, ( lovely colors though, haha! ) the Dec motor isn't moving anything. 

I sent a message about this to Astroshop.eu the German company I bought it from, to try to figure out if I should attempt a repair myself, but haven't heard back yet. I really don't relish shipping this whole rig back to Germany if I don't have to, but don't want to touch it until I know how my Warranty will be affected, as it's brand new. Don't know if I need to also contact the US people at Explore Scientific too.

Thanks for your feedback.

Paul

--
Location: southern Spain

Equipment:
Explore Scientific EOS-2 PMC-Eight mount
Skywatcher 200DPS Newtonian telescope
Telrad.
28mm 2" and 12mm 1.25" lenses.
2 and 5 x Barlows.
Macbook air 
Huawei Android T5 Tablet
Nikon D3200 DSLR
Software: ExploreStars Android & WIndows, Stellarium OSX & Android, AstroDSLR


Re: Non-Messier objects in ExploreStars #EXOS2 #ExploreStars

Paul Meesters
 

Also the mount is quite capable of being driven by ASCOM, where the world of applications awaits your use.

I tried to control the mount via Stellarium, following the setup guide found on this forum (https://espmc-eight.groups.io/g/MAIN/topic/pmc_eight_stellarium_setup/)
However, POTH is freezing up (and Stellarium too), becoming unresponsive. So, I'm forced to keep using ExploreStars.

My report of my mishaps in that thread have remained unanswered :(


But the problem is the PMC8's WIFI. I suspect it is more vulnerable to temperature and moisture than it ought to be

The temperature yesterday was around 5 Celsius (41 F), Haven't checked the dewpoint, but I was out only for 15 minutes or so.
If the PMC-8 can't handle those temperatures, then we have a problem :(

Thanks,
Paul


Re: Dec axis motor system faulty or newbie error?? #EXOS2

Paul Mogg
 

Yes I did that Tony, nothing to see, the belt is in place, the cogs turn. Unfortunately the Dec motor system started making a loud repetitive click last night as I suppose it is trying to track but can't. I tried taking my first pics of the Orion nebula last night but just got long star trails with a 30 sec exposure, ( lovely colors though, haha! ) the Dec motor isn't moving anything. 

I sent a message about this to Astroshop.eu the German company I bought it from, to try to figure out if I should attempt a repair myself, but haven't heard back yet. I really don't relish shipping this whole rig back to Germany if I don't have to, but don't want to touch it until I know how my Warranty will be affected, as it's brand new. Don't know if I need to also contact the US people at Explore Scientific too.

Thanks for your feedback.

Paul

--
Location: southern Spain

Equipment:
Explore Scientific EOS-2 PMC-Eight mount
Skywatcher 200DPS Newtonian telescope
Telrad.
28mm 2" and 12mm 1.25" lenses.
2 and 5 x Barlows.
Macbook air 
Huawei Android T5 Tablet
Nikon D3200 DSLR
Software: ExploreStars Android & WIndows, Stellarium OSX & Android, AstroDSLR

1981 - 2000 of 10443