Date   

Re: iEXOS 100 disconecting from wifi #iEXOS-100

Wes Mcdonald
 

Luiz. Are you using the “anycpu” version of the driver?  Seems to work best, and can be run in 32 or 64 bit machines.

Wes

--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: iEXOS 100 disconecting from wifi #iEXOS-100

Luiz Sanches
 

Thank you for the answer. But, I said device hub only for exemple. ANY program don't work weel. 
I would like to use APT, that works fine with my camera and can manager the mount only by secunds, after that the green light turns off and crash the aplication...


Re: iEXOS 100 disconecting from wifi #iEXOS-100

Eduardo Simone
 

Instead of using device hub on ASCOM use the Poth hub, it’s still available when you download the new version of ASCOM, it’ll ask you if you want poth hub. What ever reason, the exos and device hub don’t get along to well. But works great on POTH. 
--
Meade LX 80 6" SCT and Meade DS 114mm Newtonian
Meade 2nd Digital Series Goto mount with 497 bandbox
ExploreScientific Exos II with PMC-8
ZWO ASI533MC-Pro
ZWO ASI120MC


Re: iEXOS 100 disconecting from wifi #iEXOS-100

Eduardo Simone
 


--
Meade LX 80 6" SCT and Meade DS 114mm Newtonian
Meade 2nd Digital Series Goto mount with 497 bandbox
ExploreScientific Exos II with PMC-8
ZWO ASI533MC-Pro
ZWO ASI120MC


Re: Sould I worried about this? #EXOS2

sotirios.gg@...
 

Thank you all for your comments!
 
@Ian Morison : Yes, I could use araldite but that means that the resale value (I am not thinking of this...) goes really down!
 
@Mark Christensen : You said it all!
 
@Mario : Yiassou Mario! :)
 
As all of you point out about the ES relations to their customers (that matches my information prior the purchase), I hope that there will be a solution. Despite some minor things that i don't like in this mount, I wish that it will stay with me for a long time. The carrying capacity, the low wheight and the sturdingess are really fits my stantards. As for tracking, I got 20'' exposure with just a basic polar alligment and Ithink it will be much more if I hit the proper polar precision.

I allready messaged the ES in Facebook and I am waiting for some responce. Phone is not really my thing, because I am not doing good in English verbally. 
It is really nice and helpfull the excisting of this group. 
Thank you all!
 
Clear skies!


iEXOS 100 disconecting from wifi #iEXOS-100

Luiz Sanches
 

Hello
I bought an iExus 100 and since the beginning I have a lot of problems connecting to it.
To make it clear: I understood perfectly what situation to use UDP / TCP and cable.
 
On the IPAD the mount works perfectly and I can follow objects and the mount does not disconnect.
 
On windows, it connects, I can follow an object and seconds after being connected, the mount turns off the yellow light and causes the program that I'm using to crash (Ascom Device Hub, Stellarium, APT or C2A). With cable, the problems are the same. A few seconds later the mount turns on the green light, goes back to work and again turns off the green light and crash the used program. Both static and manual IP the problem is the same. I also tested on another computer; a windows on the Macbook Air and the problem is the same. Perhaps the problem is with Ascom Drivers.
 
In TCP / IP on Windows, ExploreStars does not Slew for an object, but controls the mount manually. The yellow light remains constant and the program does not freeze.

Thank you for your help!


Re: Sould I worried about this? #EXOS2

Ian Morison
 

Hi, as a stopgap, could you fill the crack with araldite?
But I have never found a company that treats its users so well!
Cheers,

Ian

Virus-free. www.avast.com


On Wed, Nov 11, 2020 at 6:12 PM Mark Christensen <mjcw500@...> wrote:
Should you worry about it? A bit, but really the factory that cast it should worry about it more. I have a similar non-structural casing flaw in the interior of the EQ head - I found it only when I opened it up to tune it. Out of warranty and not critical.

But it speaks to poor quality control at the factory, although at the price point of the older EXOS-2s ($460 when I bought mine) it is hard to complain.

For the record (my firm used to make four axis turrets that had to operate in high g and vibration environments), castings are the weakest form of metal work even if there are no flaws. Machining from forged billets is the best but costs a lot more. After that, machining from extruded billets like Losmandy does, then machining from cast billets. Last place in strength is machining of cast shapes (not billets).

The forging and extrusion pressures (and heat) makes the metal stronger, which of course means machining is slow and there is more of it. Weakest are castings. Poor quality control makes it worse, of course.

It all comes down to economics, but things like this cost the companies in both replacement costs and reputation, so I sure ES will do right by you.

Mark Christensen


Re: Sould I worried about this? #EXOS2

Mark Christensen
 

Should you worry about it? A bit, but really the factory that cast it should worry about it more. I have a similar non-structural casing flaw in the interior of the EQ head - I found it only when I opened it up to tune it. Out of warranty and not critical.

But it speaks to poor quality control at the factory, although at the price point of the older EXOS-2s ($460 when I bought mine) it is hard to complain.

For the record (my firm used to make four axis turrets that had to operate in high g and vibration environments), castings are the weakest form of metal work even if there are no flaws. Machining from forged billets is the best but costs a lot more. After that, machining from extruded billets like Losmandy does, then machining from cast billets. Last place in strength is machining of cast shapes (not billets).

The forging and extrusion pressures (and heat) makes the metal stronger, which of course means machining is slow and there is more of it. Weakest are castings. Poor quality control makes it worse, of course.

It all comes down to economics, but things like this cost the companies in both replacement costs and reputation, so I sure ES will do right by you.

Mark Christensen


Re: Sould I worried about this? #EXOS2

Jeff Snell
 

Yep, ES has your back.  Some of the best customer relations and service I’ve seen.

They replaced an entire EXOS2GT mount for me about a year and a half ago after a motor/gear issue.

Jeff


On Nov 11, 2020, at 5:53 AM, Steve Siedentop <sdsiedentop@...> wrote:


That happens occasionally with cast metal.  Give customer service a call and let them know.  They will take care of you.  Explore Scientific isn’t perfect, but they own their issues and take care of their customers.  It may never break, but given where it is, I don’t think I would wait until it does.

-Steve

On Wed, Nov 11, 2020 at 7:37 AM <sotirios.gg@...> wrote:
New ownwer of Exos2 PMC-Eight here!
I noticed this. Sould I worried?


--
Mounts: ES PMC-8 G11 with Ruland Couplers and One Piece Worm Blocks, Skywatcher NEQ-6
Scopes: ES ED127CF FCD100, Orion 6” Mak, Stellarvue SV80EDT, Coronado Solarmax 40
Cameras:  CentralDS CDS-600, CentralDS Astro 60D, Orion Starshoot SSAG
Msc: Moonlite Focusers, Astrozap Dew Straps, Pegasus Ultimate PowerBox
Software: PixInsight, Cartes du Ciel, BackyardEOS, SkySafari


Re: Sould I worried about this? #EXOS2

Steve Siedentop
 

That happens occasionally with cast metal.  Give customer service a call and let them know.  They will take care of you.  Explore Scientific isn’t perfect, but they own their issues and take care of their customers.  It may never break, but given where it is, I don’t think I would wait until it does.

-Steve

On Wed, Nov 11, 2020 at 7:37 AM <sotirios.gg@...> wrote:
New ownwer of Exos2 PMC-Eight here!
I noticed this. Sould I worried?


--
Mounts: ES PMC-8 G11 with Ruland Couplers and One Piece Worm Blocks, Skywatcher NEQ-6
Scopes: ES ED127CF FCD100, Orion 6” Mak, Stellarvue SV80EDT, Coronado Solarmax 40
Cameras:  CentralDS CDS-600, CentralDS Astro 60D, Orion Starshoot SSAG
Msc: Moonlite Focusers, Astrozap Dew Straps, Pegasus Ultimate PowerBox
Software: PixInsight, Cartes du Ciel, BackyardEOS, SkySafari


Re: Sould I worried about this? #EXOS2

Gord Farmer
 

That’s a bad casting ....if it’s a new unit I’m sure the gang at explore scientific will do something about it .......



On Nov 11, 2020, at 7:37 AM, sotirios.gg@... wrote:

New ownwer of Exos2 PMC-Eight here!
I noticed this. Sould I worried?
<IMG_20201107_164004.jpg>


Re: Sould I worried about this? #EXOS2

Mario
 

Yiassou Sotiri, 

Wow....that's like buying a new car with a cracked tire rim! I'd hang on to that receipt :)

On Wed, Nov 11, 2020 at 7:37 AM <sotirios.gg@...> wrote:
New ownwer of Exos2 PMC-Eight here!
I noticed this. Sould I worried?


--
Regards,

Mario
Streetsville, Ontario

Mounts: iExos 100, Skyguider Pro
Scopes/Lenses: Main/Orion 80mm, DSLR/Tamron 18-400mm lens, guide/ZWO-340A
Computer: ASIAir
Cameras: Canon T2i DSLR, ZWO120MM (guide)
Utility Software: iPolar (for Skyguider polar alignment), iCap, Explorestars, Canon EOS Utility
Image Processing Software: Photoshop


Sould I worried about this? #EXOS2

sotirios.gg@...
 

New ownwer of Exos2 PMC-Eight here!
I noticed this. Sould I worried?


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Timothy Myers
 

M42 from this past weekend


--
Tim Myers

Telescopes:           Celestron 4SE, Celestron 8SE, SkyWatcher 100ED Pro
Mounts:                 4-5 SE, 6-8SE, EXOS-2GT with PMC-Eight
Cameras:               ASI1600MC Imaging Camera, Cooled, ASI120 Guide Camera
Focuser:               ZWO EAF
Scope Mini PC:    Topton Pentium
Laptop:                 Lenovo
Software:             CDC, SharpCap Pro, NINA, PHD2


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Wes Mcdonald
 

Nice Bill.

Wes

--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Ian Morison
 

Wonderfull Vince!
Cheers,

Ian

On Mon, Nov 9, 2020 at 3:47 AM Vince White <vnwhite@...> wrote:
All,
 
I thought I would share my recent attempt at the Flame Nebula, Horsehead Nebula and NGC 2023. You can see my last try about a year ago here.

Captured over 8 nights, from Oct 31 - Nov 8, with a total exposure of just under 20hrs and a waning full moon in Bortle 9+ white Houston skies.  I'm shooting to the exposure limit of the light pollution here in Houston, using the Optolong L-eNhance filter, which is acting as a narrowband h-alpha filter for the red channel of my unmodified EOS RP camera.

Focal length is 864mm and resolution of 1.37 arc-sec/pixel, with PHD2 guiding error between 0.6 - 1.2 and an average of 0.8 arc-sec error, where everything was run on my telescope mounted RPI4 connected to the PMC-Eight via WiFi.  Shot at ISO1250 and between 400 to 600 second exposures.

Regards,
Vince
--
Mount: ES PMC-8 EXOS2-GT
Scopes: BRESSER 208mm f/3.9 Newt + ES HR Coma Corrector, Celestron C90 Mak, generic 50/191mm guide scope
Cameras:  Canon EOS RP, QHY 5-III 290C, T7C (ZWO ASI120MC clone)
Misc: 2" Optolong L-eNhance filter, 2" Optolong UHC filter, Raspberry PI 4
Software: INDI + Kstars + EKOS, DeepSkyStacker, GIMP, Lightroom, Photoshop, SIRIL


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Wes Mcdonald
 

Very nice Vince.  Wow.  
Wes

--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Vince White
 

All,
 
I thought I would share my recent attempt at the Flame Nebula, Horsehead Nebula and NGC 2023. You can see my last try about a year ago here.

Captured over 8 nights, from Oct 31 - Nov 8, with a total exposure of just under 20hrs and a waning full moon in Bortle 9+ white Houston skies.  I'm shooting to the exposure limit of the light pollution here in Houston, using the Optolong L-eNhance filter, which is acting as a narrowband h-alpha filter for the red channel of my unmodified EOS RP camera.

Focal length is 864mm and resolution of 1.37 arc-sec/pixel, with PHD2 guiding error between 0.6 - 1.2 and an average of 0.8 arc-sec error, where everything was run on my telescope mounted RPI4 connected to the PMC-Eight via WiFi.  Shot at ISO1250 and between 400 to 600 second exposures.

Regards,
Vince
--
Mount: ES PMC-8 EXOS2-GT
Scopes: BRESSER 208mm f/3.9 Newt + ES HR Coma Corrector, Celestron C90 Mak, generic 50/191mm guide scope
Cameras:  Canon EOS RP, QHY 5-III 290C, T7C (ZWO ASI120MC clone)
Misc: 2" Optolong L-eNhance filter, 2" Optolong UHC filter, Raspberry PI 4
Software: INDI + Kstars + EKOS, DeepSkyStacker, GIMP, Lightroom, Photoshop, SIRIL


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Jerry Hubbell - Explore Scientific VP Engineering
 

Thanks Ian for your fine image. I will merge this thread with the main astrophotography thread that we use to show what these mounts can do.
--
Jerry Hubbell
Vice President of Engineering

Explore Scientific, LLC.
jrh at explorescientific.com

www.explorescientificusa.com
1010 S. 48th Street
Springdale, AR 72762
1-866-252-3811

Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
             Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home


Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Wilderness, VA
Mounts
: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras:  QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating

Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Ian Morison
 

Hi all, 
      I think members are encouraged to post images taken with this mount.  Sorry if I am wrong.
This is not great but, taken near the centre of a town so a fair amount of light pollution to contend with and with only 40 minutes exposure, it is perhaps not too bad.  A half size image. Some details below if any are interested.  At least it shows what one might be able to be achieved from a dark sky location and longer exposure. (We are not allowed to travel at the moment.)
Cheers,
Ian

This mount, small refractor and camera make a wonderful, portable, imaging system for medium sized fields.

80 mm semi-apo refractor with Teleskop Service (German) 2 inch field flattener.

Sony A7S, 12 megapixel camera at ISO 2000,  15 second exposures to ensure the centre of the galaxy was not over exposed.  Long exposure noise reduction was not used.

Mount aligned with a laser pointer through the sighting tube but I was not wanting to be too precise so that the image would move slowly across the sensor during the total exposure time.  In fact 1.3 pixels movement in each exposure so there was no star trailing and a total of 104 pixels during the imaging period.  This should  remove what Tony Hallas calls 'Color Mottling' and the effects of any hot pixels - in fact none could be seen in the captured image..

Galaxies (M110, M32 as well as M31) and stars separated and processed individually and then recombined to give the final image.

1361 - 1380 of 9972