OK thx Op ma 27 sep. 2021 20:03 schreef Harry via groups.io <flykai1@...>:

Ok Wes, when done I'll send you my setup list. Thankyou

James: The hub is new replacement for POTH. It works fine it seems. Either POTH or the hub are great. Wes. Virus-free. www.avg.com -- Wes, Southport NC EXos2-GT PMC-8, iExos 100 ES ED

James: 1. Uninstall all of ascom 6.0 2. Download ascom 6.5 SP1. When you do the install, there is a check box to install POTH also. Poth will not come in by default. So check the box. Note you

Wes, also I see that ascom platform 6.5 suggests that device hub is the future and poth is out . Have you heard of this?

Wes, one question before I put the post together on my setup for you. I had a message stating that that I needed to update from ascom 6.0 to 6.2 which I did. Now I find poth operating irrationally

Patrick: Please post this to the Applications sub group. That is where the asi air crowd is located. Perhaps someone that uses Asi Air can help you. the baud rate for the firmware is 115200. Wes.

Patrick, using a serial cable, the correct baud rate is 115200 -- Harry Mounts: ES iExos 100-PMC Eight, ST3 Tripod Scopes: ES ED80CF, ES AR102, Meade ETX 90 EC (Deforked) Guide: ZWO 30mm Mini, ZWO

James: No, not normal. How are you connected? Please give detail of all software in use and how the overall system is configured. Wes. Virus-free. www.avg.com -- Wes, Southport

JAmes: What program are you using to move the mount? Ascom /poth will require you unpark the mount before it will move. This is a button on the poth or hub screen. Please describe all of the

Howe can I connect mine iexos-100 to the zwo asiar pro? I have the good cables but everytime it's saying baud is not good I try all the baud Thx for the help

One other thing Wes it seems like all is working now but when I click on the hand control I guess that's what it's called the mount takes say 15 to 20 seconds before it starts to move is this normal ?

Hi Wes, well someone at Explore Science has not got back to me so I've been fiddling around and it seems I have everything working except the mount does not move. I reinstalled all the drivers,

James Ok. You are really close. If you can get ahold of Tyler. Wes -- Wes, Southport NC EXos2-GT PMC-8, iExos 100 ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide

Hi Wes. I think I have to call support Monday. I have downloaded the package 3 times now. I can get all green lights at the bottom of the page, but when asked to choose my telescope it won't accept

James The vixen bar when mounted in the saddle is correctly pointing along the ra axis. It does look as though it is not but it is. The camera should be mounted to look directly down the vixen bar.

James The hole is obscured because the telescope is supposed to be turned to dec =0 or 90 out when you are using the polar scope. This moves the telescope so it will not hit you in the head when you

James Tht would only be because the driver is not installed. Try reinstalling the espmc8 driver that came with the install pack Wes -- Wes, Southport NC EXos2-GT PMC-8, iExos 100 ES ED 127, 10"

Hello folks, can anyone tell me why in the Pacific 100 setup when in ascom telescope chooser l can not choose ES_PMC8 telescope while working in poth..

I admit that I am a total noob, so please forgive my naive and somewhat dumb question. While I wait for my telescope to come in and get shipped to me, I am really trying to learn my EXOS-II