Wes et al, I'm now at a complete loss, I just can't seem to get things straightened out. I have my camera mounted to point directly down the vixen bar. But I still seem to be 90 degrees off. I tried

I absolutely love my little IEXOS100 mount! Thank you guys for this little mount that could. I don't get to use this mount (between work and weather) that often but when I do, I just so enjoy seeing

It’s like Bach: every time you listen/look, you hear/see something new.

Thanks. 2.5 hours for each panel. -- Sincerely, Jennifer Shelly AstroPorch, VA Mounts: ES PMC-8 G-11, ES PMC-8 EXOS-2, ES PMC-8 iEXOS-100 Scopes: ES ED127 FCD-100, Askar FRA400, Askar FRA600, ES

Nice work Shelly. Well done. What was the total integration time on this? -- Rob Seaforth, Ontario EXOSII-PMC8 Mount Starwave 80ED, ZenithStar 73 Starfield 50mm/ZWO ASI Guide Scope Altair 224c/ZWO

Oh yeh…..👍👍 -- Wes, Southport NC EXos2-GT PMC-8, iExos 100 ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL Polemaster, Orion ST-80 and SAG, ZWO

-- Sincerely, Jennifer Shelly AstroPorch, VA Mounts: ES PMC-8 G-11, ES PMC-8 EXOS-2, ES PMC-8 iEXOS-100 Scopes: ES ED127 FCD-100, Askar FRA400, Askar FRA600, ES N208CF, QHY Mini Guide Scope, Solomark

Another take on proccessing the Eastern Veil Nebula in Photo Shop... -- Derrell Oliver ES iEXOS-100 PMC-Eight with ES Heavy Duty ST3 tripod & Azimuth Adjuster ES USB Power Bank Astro-Tech

Have you selected the right baud rate. -- Michael Whitaker Wakefield, UK. MOUNTS. Exos-2 PMC Eight.. SCOPE: RVO Horizon 72ed. CAMERA: Not Applicable. SOFTWARE: Just iPad at moment.

First two panels of the Cygnus Loop. Work in process. 30 x 5 min for each panel (2.5 hours/panel) Explore Scientific 127 FCD-100 (FL 952) TS Flat 2.5 1x Moonlite CFL 2.5 with High Res Stepper Motor

Thanks Wes for the explanation on those explore app parameters. I have to say after some learning on my part, that the pmc8 is truly remarkable system. I’m hoping that plate solving can be

Robert I thank you very much. I never found this document. Thank you for sending the same Regards Ram

Thank you. This is putting me on the right path I will keep you posted on my progress Ram

Hello Ram Welcome to the group. I too am just past a newbie, but still learning Balancing a mount is not specific to ExosII. There are plenty of videos on YouTube I set the mount on a firm location

Ram, Section 4 may help you: https://espmc-eight.groups.io/g/MAIN/files/User%20Contributions/EXOS2PMC8_TuningNotes_v2.pdf - Bob -- Mounts: ES PMC-8 EXOS2, Serial Scopes: SW 130P-DS, SV 102EDT, ZWO

Here is a very informative video on how to balance a German equatorial mount. https://youtu.be/rNT93cvHAvA -- Tyler Bowman - Customer Service Office +1(866) 252-3811 Ext: 516 Fax

I received the EXOS2 mount yesterday with PMC 8. I am very impressed by the build. I am looking for clear instructions on how to balance the mount. Either written with pictures or a YouTube video. The

Hey Dino, this website is amazing for everything ASIair related and will help solve your issues. They have many other posts as well, but I believe this is the article that will solve your current

Dino The motor count settings are the number of motor steps per full rotation of the wheel. These values are hardware related and should be left as set by the application. If you change those the

Thanks Wes. Actually, I thought I was in the Application subgroup when I posted. My bad. But now that I have your attention, 🤓, I have a question about the tracking parameters in ExploreStars app.