Terry: Have you changed the slew rate to 2.5 in POTH before attempting to use the directional buttons? If you did not that could explain why the mount is not moving. -- Sincerely, Jennifer

Can’t say why poth won’t stop but the hub works fine. There was an issue long ago but that is corrected now I would suggest that the arrow keys on poth are not what you should use for centering

TJB Can’t say what’s up with poth but the ascom hub is fine to use. Please wait means the pc is not communicating to the pmc8. Connect the pc to the pmc8 and the use the cmd.exe, enter

Sorry to hear that Andreas, if I find a solution I'll post it here, I have changed everything over to use Device Hub instead of POTH, hopefully it will work but reports from more experienced users

"Still haven't managed to get POTH motion controls to work fully, the stop button does nothing." Same for me. When slewing manually the mount won't stop via Poth Controller. Terry <vdsr.tb@...>

Still haven't managed to get POTH motion controls to work fully, the stop button does nothing so the only way to prevent the mount from continuously moving is to hit the park button, obviously that's

Added a small comment also. -- James Ball Dawson Springs, Ky Mounts: iEXOS-100 Scopes: Meade ETX90RA(deforked now) Sky Watcher 150MCT Camera: ZWO ASI 120MC-S Software: Explore Stars Android, ASCOM,

Hello, To clarify, my 3D printable PoleMaster Mount uses the adapter that comes with the standard PoleMaster system. Nothing else is needed. https://www.thingiverse.com/thing:4694356 iEXOS-100

I don’t know if it’s compatible, but there are several options. You could use polar alignment in NINA. Also, if you have room at the end of your vixen rail, there is an adapter for the PF camera

Hi Steve, I see time ago 3D adapters on Thingiverse but the problem with that adapters is the need of other QHY adapter. The ADM adapter is great!!!!! but having the PolarFinder adapter from Explore

If you have access to a 3D printer, you can find one on Thingiverse that works quite well. https://www.thingiverse.com/thing:4694356 ADM also makes an adapter that secures to the bottom of the

Hi guys, I want to know if the PolarFinder adapter is compatible with Polemaster. I have the PolarFinder and i thinking to buy a Polemaster but the iExos100 does not have official QHY adapter. Thank

--Re-installing Explorestars hasn't helped but at least I can use it on my android tablet if I just want observation or unguided short exposure imaging My big problem now is POTH motion controls,

I'll try a re-install then -- EXOS 2 PMC-Eight Watchdog Disabled Fujifilm X-T2 Sigma 150-600mm Contemporary Vixen VMC-110L

Thanks Yes I had installed the Ascom drivers from the update kit, a nice clean install as this machine has not had Ascom installed previously, so it's a fresh install of Ascom 6.5 with POTH and then

Jennifer Thank you for the three options and the recommendation as well I am going to take the option 1 for now until I get some experience. Regards Ram

As for the please wait in explorestars , I had the same problem after deleting g and installing it three times. To fix my problem I went through the program few to the app then through the advanced

Ram: The cheapest option is to replace the Losmandy dovetail on the scope with a long Vixen dovetail. The next mid-range price option is and ADM D to V converter that fits into your existing Vixen

Good Morning Terry Have you loaded the updated ASCOM drivers from the Firmware update kit? I would further suggest on YOUTUBE go the Explore Scientific channel. Episode #171 Jerry Hubbell does a

Hi folks I thought I'd finally have a go at updating my EXOS II to the latest firmware but now I'm struggling At the same time I wanted to install the software onto a different laptop I followed the