Hi, I am sorry if this is a newbie question but I was wondering if someone can help me as I am new to the PMC-8 system. I am trying to connect the Pmc8 to phd2 (Pulse GUiding). So should I

Hi Matt and Steve, Thanks for looking into this. When I used Internet Explorer, the downloads worked fine on both PCs. Paul -- AT72EDii OTA (on backorder) iEXOS-100 mount ZWO 30F4 mini guide

Hey. I've checked this main URL with VirusTotal, it compares it with a number of commercial antivirus engines etc (~80 or so), and it checks out OK. The actual download site

Hi Paul, I have not encountered this trouble, however, it's possible you may be using the Safe Browsing feature (Chrome), SmartScreen (Edge) on the browser, or, possibly some anti-virus software

Hello, On two different Windows 10 PCs, running both EDGE and Chrome, when I try to download anything from the https://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-system, like

Hey Guys, This is my first attempt at M45 taken with my iEXOS-100 PMC 8 and Astro-Tech AT80ED and 0.80 focal reducer/field flattener. This was a quick processing job in PS, need to spend some more

The Wizard Nebula taken last night. 2hr 50min of 5min exposures. Taken using iEXOS-100, Sky-Watcher Evostar ED APO 72mm, and Canon RP. Enjoy and clear skies! -- Mounts: Explore Scientific EXOS II

Change the channel? That is it? Yes, the mount is on channel 6, best for my location.

I can try....

have you tried to use the WIFI changer to see if that helps with Wifi to help with a stable connection.

have you tried using POTH instead of the HUB im curious if you had to use it and does it give the same results. I'm aware that the device hub took over with the 6.5 update but you can still use poth

OMG.......... 1 minute after I send the last message, the mount disconnect. I am using APT connecting with ASCOM via ASCOM device hub. The APT and the hub freezes, I went in the pmc-right

Good news: Serial works 100% good. Before, the problems was the same, wifi or serial. But I changed the usb cable and voila! Works! The cable that I did used, was new, but, I don't know why, didn't

Jennifer Beauty. Wes -- Wes, Southport NC EXos2-GT PMC-8, iExos 100 ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL Polemaster, Orion ST-80 and SAG,

you must enter this into the competition at explore scientific.

First processed image of M45 with my new ES iExos-100 and Askar FRA 400 scope. M45 ~ The Pleiades 11/16/2020 @ AstroPorch, VA QHY 168C @ -15C Gain: 4 Offset: 50 20 Lights @ 240s 10 Darks @ 240s 50

Don, Glad it worked out. Interested to know if you have any binding issues with all the backlash taken out. Also, I had the same issue not being able to turn the screw on the worm gear bearing

So any idea what it could be? or what i could do to find out? The pattern really repeats and stays the same. Maybe that info can help. Any sugesstion is appreciated

Thanks for the feedback guys. I just guess this is a 'feature'..... I have so much grinding noise that I am going to adjust as much of that out and see where backlash falls. Honestly, the screw at the

Well, the direct Mini USB to USB-C cable arrived today and it works just fine. That said, just curious why it can't pass the over a USB hub. Just tired of having to buy a new cable for every little