I have been using my Exos II mount with Explore Stars on the Ipad with no issues; recently acquired a new windows laptop and started the process for switching to serial mode for use with the ASIAIR

Thanks. Not a problem.

Oh thanks for that. I had looked for it on the Ascom site. I'll give that a try.

Haha... Jerry and I were responding at the same time so, sorry for the duplication of info! Patrick -- Explore Scientific iEXOS-100 and EXOS-2GT (non-PMC) Explore Scientific ED 102mm Refractor

You can install POTH when installing ASCOM 6.5. You won't find it anywhere else. You just need to select the option to install it within the installer. POTH works just fine with the current version

POTH is available to select when installing ASCOM Platform 6.5 you have to manually select it prior to running the installation. You can always run the installation program again to install it later

Glad you got it working with CdC. Not as pretty as Stellarium but it does the same job. POTH was in Ascom Platform 6.4. In Ascom Platform 6.5 it was replaced by Device Hub.

I can get Cartes du Ciel to work a PHD 2 works as I am setting up to guide my mount. I will look for the older ASCOM on their site. I did not see a POTH option when I downloaded it. Thanks for all

I am using the newer ASCOM Hub -- Bear40 New to astronomy

Thanks wes I was going to send one of Orion I did last night also But the server is out of space? (no pun intended heheh) Someone might want to check that Cheers! Dave -- Scopes: Sky Watcher

Dave Both images are great. The second is sharper with more stars and is just striking. Nice. Wes -- Wes, Southport NC EXos2-GT PMC-8, iExos 100 ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt,

Thanks Harry. :) -- Scopes: Sky Watcher 200PDS, Skywatcher 72ED Mount: Explore Scientific PMC8 EXO2 Cameras: ASI 294MCPRO Coooled, Altair guide cam + 50mm scope Software: Sharpcap Pro ,PH2, Stelarium

Wow Dave! Terrific. -- Harry Vero Beach, FL Mounts: ES iExos 100-PMC Eight Scopes: ES ED80CF, ES AR102, Meade ETX 90 EC (Deforked) Guide: ZWO 30mm Mini, ZWO ASI120MM-Mini Software: ASIair Pro, iPad

Hi Guys, After a long spell of no clear nights and technical problems (not the PMC mount btw, that is perfect!) I did manage to get a good one of the rosette nebula This was 45 X 3 Minute Lights and 1

Bear Stellarium has been reported to have an issue with the ascom 6.5. Sounds like you should stick with 6.4 or maybe 6.5 but using Poth. Works fine with 6.4 Wes -- Wes, Southport NC EXos2-GT

I can connect my iexos-100 to Device Hub with Ascom 6.5 but when I try to connect Stellarium through device hub, it connects but doesn't slew. I have been told that it is a bug in the newest version

Make sure you have the latest version of Stellarium. Make sure you have the latest version of ASCOM Platform. Make sure you change your mount configuration to Serial and that you have the

Are you using POTH or the newer ASCOM remote? -- Mounts: Explore Scientific EXOS II GT, iEXOS-100, Celestron AVX Scope: Explore Scientific AR102, AR152, FirstLight 152mm Mak-Cassegrain, William

I connected to wifi and the ascom driver is working. I can't figure out to how to get stellarium to work with the mount selected ASCOM and the PMC-eight driver and turned on the remote control. . I

I am looking forward to purchasing the mount in the near future. Sent from Mike