Jerry, I’m glad you asked for more info about my situation, as it appears I may still have a POTH issue. I just hooked up my system, used Config. Mgr. to make a successful serial connection, &

Hi Jed, thanks for your kind words, I am glad you got it going. I am interested to learn more about the issue you are describing with the POTH as this is the first time I have heard about this

Hello Jerry, It was unfortunate that my real problem had nothing to do with PMC-Eight, but rather the way ASCOM’s POTH Dome Hub operates with it. But now that I know that it will knock out my

Hi Jed, Great to hear you have been able to get your mount working as it should. The system definitely requires some work to understand and get working. My goal is to continue to improve the system

Hello Kent, Just to let you know that I have just ordered the azimuth adjuster adapter for the iEXOS-100 mount. Anything that will help to make polar alignment faster & easier is needed. I had to

Wes, In the video Jerry has you click on the POTH Dome Control in the ASCOM Platform program after completing the Config Mgr setup, & in setting up the POTH hub panel, one of the items to be filled

Jed Glad to hear all is well. I for one would love more elaboration on what the setup error was in the Poth Hub. Please let us in on it. Wes. -- Wes, Southport NC PMC-8, ES ED 127, 10" LX200GPS,

Wes, You probably won't believe this but I just actually managed to get all of the way to step 8 of your outlined steps to be taken. To do so, I literally re-installed all of the software; & with

Wes, First, I very much appreciate your past & present efforts to help me sort this out. I confess that one of my problems has been working with an entirely different OS; if this was my Mac I would

Jed: Ok, let's all take a deep breath here. Got to get you going. These steps will work until the break. Lets have you do them in order and report back the breakage. 1. The fact that you have an

I’ll answer the question about me: Because doing things remotely is not easy, because I cannot touch, feel and see what’s going on. And because sometimes I am doing something wrong, or at

Hope this help, not how, corrector does not correct as intended... Get Outlook for Android

Hi Jed, I had a prolific serial to USB cable and was having all kind of connection error, I bought an FTDI cable and no problem since. How this help. Luc Get Outlook for Android

Jerry, Let me make it clear: 1. I only mentioned EQMOD because the ASCOM diagnostics says that there is an error with it & my telescope is not found. This apparently is a feature of ASCOM that I was

OK, here goes. The skies did not cooperate as much as they could have, but I got out early and set the tripod + mount in the driveway. Someone had mentioned Polar Scope Align Pro. I had tried this

Hi Jed, First, I think you are a making this much more difficult than it is. The ASCOM driver group is not going to know the details of how to use the PMC-Eight system. This is the only forum with

Hi Jed, I am new to the iEXOS-100 mount, have not used it outside yet, but have played around with it inside and got the serial working. I find using the PMC configuration manager a bit painful when

Jed, When I read this: "Further to the above info, with the serial connection showing positive, when I now open the POTH dome control hub controller for my mount/telescope & click on the connect

Rosette Nebula 60x180sec @ ISO 1600 Canon T3i Ha modded LZOS 3M-6A, 500mm F/6.3 Bortle 8

Jed the driver works. You have to accept the fact that every other person in the group that wants serial.has it working. 1. You have a ftdi chip USB serial? 2. You have the right ftdi driver? 3.