Date   

Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Mirko Gude
 

Hi,

last week I had the chance to made some pictures (videos) of Mars. It was my first attempt with Mars and it was also the first time were I could test new hardware and settings together. So the Mars was not my first goal, but at the end I’am surprised, what is possible.

BTW, I noticed, that Explore Scientific offers focal extenders. Are there any limitations in use with different telescopes? I’ve only a cheap 1,25’’  2x Barlow… so I think about a 3X 50,8MM/2“ or the 5X 31,7MM/1.25“ for my Skywatcher 80/600. If anybody has experience with this, any hint is welcome.

Regards, 
Mirko





--

Mounts: ES PMC-8 IEXOS 100, ES EXOS2-GT 
Scopes: Skywatcher 80/600
Cameras:  Nikon Z6, D7000
Lens: Sigma 150-600mm, Sigma Art 135mm/1,8, Nikon Z 50mm/1,8
Msc: LRTimelapse Pro Timer 2.5, Raspberry Pi4, Polemaster, GPS Dongle
Software: PixInsight, Kstars, Starry Night, Redshift


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

 

Excellent. 
--
Michael Whitaker
Wakefield, UK. 
MOUNTS. Exos-2 PMC Eight..
SCOPE: RVO Horizon 72ed. 
CAMERA: Canon 650d
SOFTWARE: Just iPad at moment.


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Wes Mcdonald
 

There you go stade!

Wes

--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Stade
 

Lots to learn but first night all my equipment played nice together😂


Re: User Manual for Android version of ExploreStars? #ExploreStars #Android #VIDEO

Jerry Hubbell - Explore Scientific VP Engineering
 

There is no platform specific user manual for ExploreStars. We have created  videos that are on your YouTube channel and linked a couple of other videos on our website.
We dedicated one of our OpenGOTO Community Live progams to the Android ExploreStars application. Here is the link to the video for this episode:

https://youtu.be/KPDcQKdO1o4

--
Jerry Hubbell
Vice President of Engineering

Explore Scientific, LLC.
jrh at explorescientific.com

www.explorescientificusa.com
1010 S. 48th Street
Springdale, AR 72762
1-866-252-3811

Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
             Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home


Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Wilderness, VA
Mounts
: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras:  QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating

Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!


Re: Astrophotography Done with the iEXOS-100, EXOS 2, and G11 Post your Pictures and Details! Lets Show What These Mounts Can Do. #G11 #astrophotography #iEXOS-100 #EXOS2

Timothy Myers
 

my M27


--
Tim Myers

Telescopes:           Celestron 4SE, Celestron 8SE, SkyWatcher 100ED Pro
Mounts:                 4-5 SE, 6-8SE, EXOS-2GT with PMC-Eight
Cameras:               ASI1600MC Imaging Camera, Cooled, ASI120 Guide Camera
Focuser:               ZWO EAF
Scope Mini PC:    Topton Pentium
Laptop:                 Lenovo
Software:             CDC, SharpCap Pro, NINA, PHD2


User Manual for Android version of ExploreStars? #ExploreStars #Android #VIDEO

Paul Mogg
 

Hi there, is there a user manual available that is specific to the Android version of ExploreStars? I'm a beginner to astronomy equipment so I need exact instructions as to how these things work, and so far have only been able to find instructions for the Windows version, instructions for installing the Android version, but no user manual for the Android version, which has a lot of differences to the Windows version, e.g. star alignment, new "ENTER" and "OBS" buttons, different functionality on the "SYNC" button. How do you you capture a location?. I know you can work these things out by trial and error, but frankly you shouldn't have to guess and waste your time doing that. Thank you.


Re: #FIRMWARE #FIRMWARE

Roy Shotton
 

Thanks Wes, I have the FTDI chipset and everything else works fine. I’m sure I will find a workaround I just thought I may have a fault. However it’s a computer isn’t it🤔


Re: #FIRMWARE #FIRMWARE

Roy Shotton
 

Thanks Jennifer I will give that a try.😊


Re: #FIRMWARE #FIRMWARE

Jennifer Shelly
 

Roy:

I assume you attempted to update the FW using the Configuration Manager Tool.  Another way to update is manually via Command Prompt.  There are instructions located in the PMC-8 Application Note (AN001).
--
Sincerely,

Jennifer Shelly
AstroPorch, VA

Mounts
: ES PMC-8 G-11, ES PMC-8 EXOS-2
Scopes: ES ED127 FCD-100, ES Levy Comet Hunter, ES N208CF, QHY Mini Guide Scope, Solomark F60 Guide Scope
Cameras: QHY600M, QHY128C, QHY168C
Misc: MoonLite CFL 2.5 / High Res Stepper / V2 Mini Controller, Baader SteelTrack NT / SteelDrive II, Baader UFC, Optolong 2" L-Pro / L-eNhance, QHY CFW3-L, Baader 2” LRGBSHO CCD
Imaging Software:  NINA, APT, SharpCap Pro
Processing Software: PixInsight, Lightroom, Premiere Elements


Re: #FIRMWARE #FIRMWARE

Wes Mcdonald
 

Roy

I had the same problem.  Unfortunately I do not believe there is a cure, just a work around.  

1.  There was a suspicion that it had to do with the ftdi or lack of an ftdi chip set.  I had the failure with both I believe .  But I might be remembering it wrong.  If you are using a non ftdi usb-serial adapter then get one with the ftdi chipset.  If you are an iexos it already has it in there, so look at the next point.

2.  What worked for me was to change the pc being used to load the code.  Not ideal I know.  I couldn’t get it to work using my windows 10 tablet.   It did work in a bootcamp Mac air, and it works fine on my Dell laptop.

Sorry man, that’s all I can tell you.   Find another computer.  

Wes

--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


#FIRMWARE #FIRMWARE

Roy Shotton
 

Hi All. I am having issues uploading the latest firmware. I have full control of the mount via serial but the response from the PMC manager keeps coming back 'Checksum Error on Com5'
Is this a laptop issue or a PMC8 issue. Here is the log from the PMC manager for each of the uploads.

Any ideas?

Regards

Roy

41       EVT:503-Checking COM5.
EVT:505-Propeller chip version 1 found on COM5.
EVT:506-Loading RAM
EVT:507-Verifying RAM
ERR:351-RAM checksum error on COM5.

40       Path to EEPROM: "C:\Users\roysh\Documents\PMC8Firmware\9t_17a_EXOS2.eeprom"
39       Path to Propellent.exe:"C:\Program Files (x86)\Explore Scientific Utilities\PMC-8 Configuration Manager 1.0.3\Propellent.exe "
38       Attempting to upload ROM
37       EVT:503-Checking COM5.
EVT:505-Propeller chip version 1 found on COM5.
EVT:506-Loading RAM
EVT:507-Verifying RAM
ERR:351-RAM checksum error on COM5.

36       Path to EEPROM: "C:\Users\roysh\Documents\PMC8Firmware\9t_17_EXOS2.eeprom"
35       Path to Propellent.exe:"C:\Program Files (x86)\Explore Scientific Utilities\PMC-8 Configuration Manager 1.0.3\Propellent.exe "
34       Attempting to upload ROM
33       EVT:503-Checking COM5.
EVT:505-Propeller chip version 1 found on COM5.
EVT:506-Loading RAM
EVT:507-Verifying RAM
ERR:351-RAM checksum error on COM5.

32       Path to EEPROM: "C:\Users\roysh\Documents\PMC8Firmware\9t_15a_EXOS2.eeprom"
31       Path to Propellent.exe:"C:\Program Files (x86)\Explore Scientific Utilities\PMC-8 Configuration Manager 1.0.3\Propellent.exe "
30       Attempting to upload ROM
29       EVT:503-Checking COM5.
EVT:505-Propeller chip version 1 found on COM5.
EVT:506-Loading RAM
EVT:507-Verifying RAM
ERR:351-RAM checksum error on COM5.

28       Path to EEPROM: "C:\Users\roysh\Documents\PMC8Firmware\9t_15_EXOS2.eeprom"
27       Path to Propellent.exe:"C:\Program Files (x86)\Explore Scientific Utilities\PMC-8 Configuration Manager 1.0.3\Propellent.exe "
26       Attempting to upload ROM
 


Re: Polar alignment and Sharpcap.

Bill Kinnair <kinnawill@...>
 

Thank you Wes this is the information I needed it will help a lot.

Thanks again Bill.
--
Bill Kinnair
West Midlands UK
MountsEXOS-2 PMC-8 GOTO
Scopes: Skywatcher 200PDS + Skywatcher Skyliner 200p
CamerasZWO ASI120MC + Canon EOS 1300D
Software: ExplorerStars, Backyard ESO, ASIStudio, AutoStakkert, PIPP, RegiStax 6, PolarAlignment PRO


Re: Polar alignment and Sharpcap.

Wes Mcdonald
 

Bill:

1.  If you are polar aligned by sharpcap, you have gotten your RA axis parallel with the axis of the earth.  That is step one.
2.  If you are polar aligned, there is in principle no reason to do a 2-3 star alignment. Clear the alignment results in Explorestars and use the mount raw.
3.  If your mount is truly level, especially now east-west tilt, that is step two
4.  If you have cone error, meaning your telescope is not parallel with the RA axis, best to visualize when you are at polar home, your goto accuracy will be poor to the extent you have cone error.  It is best to calibrate out cone error if you need very accurate gotos.  This is done per a video from the Astronomy Shed (https://www.youtube.com/watch?v=WatdQlPp22Y).  This is step three.
5.  If your polar home position is not correct, then your gotos will be off.  You should establish the true polar home position.  I have a paper in the Files section of the Mounts subgroup that shows you how to find polar home.  It does a pretty good job I think, although some have reported variable results.  This procedure answers your question about where the weight bar should be at polar home.  The arrows are close, but may be off for your specific mount and setup.  Note the correct polar home is affected by the level, so establish a way to repeat your level every time.  This is step four.  Note you must restart the PMC8 with the mount at polar home after you do your sharpcap alignment to ensure the PMC8 has the correct north celestial pole ( NCP) reference.
6.  After you do your first goto and center the object you should SYNC your mount.  This will remove most if not all of the RA home error you might have, but DEC disturbances caused by residual cone and level are not removed completely except near the location of the SYNC.  Thus if you are having trouble getting deep space objects in the eyepiece, do a goto to a nearby star, center it using your red dot finder and eyepiece, and SYNC.  Then do a goto to the DSO you want to see.  It will be near about dead center.

The issue Wolfgang mentioned is that if you run the 2-3 star alignment in Explorestars and center the incorrect star, you are not going to get a good result.  All it takes is one bad star and the result is bogus.

The 2-3 star alignment is useful in that it removes RA home error, corrects for level errors, and will also correct for polar alignment error.  It does not do cone error or DEC home error correction however.  

If you have a good polar alignment but your goto is poor, you can still track objects very well, once you find them and center them in the eyepiece.  

I tried to address all of your points. Hope this helps.  2-3 star alignment just takes practice and you do need to get proper set up with respect to DEC home and cone error.

Wes.







--
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired


Re: Polar alignment and Sharpcap.

W.F.
 

Hi Bill,
same happend by me with the Polfinder.
After thinking about this i am now shure i take a wrong star for the PA.
Greetings from Germany,
Wolfgang.


Re: Polar alignment and Sharpcap.

Bill Kinnair <kinnawill@...>
 

Yes both are aligned.
--
Bill Kinnair
West Midlands UK
MountsEXOS-2 PMC-8 GOTO
Scopes: Skywatcher 200PDS + Skywatcher Skyliner 200p
CamerasZWO ASI120MC + Canon EOS 1300D
Software: ExplorerStars, Backyard ESO, ASIStudio, AutoStakkert, PIPP, RegiStax 6, PolarAlignment PRO


Re: Polar alignment and Sharpcap.

Anthony Lambert
 

There are 2 sets of little arrows. Are you aligning them for both RA and DEC?


Polar alignment and Sharpcap.

Bill Kinnair <kinnawill@...>
 

Hello everyone, I'm wondering if I could get some help, sort of ripping my hair out a little.
 
I have the EXOS2 PMC-8 and last night I used Sharpcap to Polar align, I set the mount up as usual and adjusted until Sharpcap said excellent Polar alignment.
 
So my next step was to do a 3 star alignment using Explorer Stars, so when I asked the mount to slew to the first star it was way off even in the finder scope, is that normal? So I used the controls to get the star in my FOV and centred it, it was the same for the next two stars way off. so I did the same.
 
I finished the 3 star alignment and when I asked the mount to find an object the object was not centred it was bottom right of the quick photo I took.
 
I've made sure all the information is correct by setting my Longitude and Latitude and also made sure my time is correct, the mount is balanced and level and pointing North. I think I'm doing something wrong somewhere.
 
Also may I ask should my counterweight bar be parallel with the mounts front leg? I have two little arrows on the mount that should be pointing at each other when in the home position but when they are the counterweight bar is pointing to the right quite a fair bit.
 
It's all quite confusing.     
 
Thanks in advance Bill
--
Bill Kinnair
West Midlands UK
MountsEXOS-2 PMC-8 GOTO
Scopes: Skywatcher 200PDS + Skywatcher Skyliner 200p
CamerasZWO ASI120MC + Canon EOS 1300D
Software: ExplorerStars, Backyard ESO, ASIStudio, AutoStakkert, PIPP, RegiStax 6, PolarAlignment PRO


Re: Problem Conected PMC-Eight #ASCOM #EXOS2

Angelo <axlzerox7@...>
 

Jerry, thank you very much! Everything connected with NINA !. Now just to enjoy my exos 2. Thank you !!!

El lun., 5 oct. 2020 a las 22:23, Jerry Hubbell - Explore Scientific VP Engineering (<jrh@...>) escribió:
Hi Angelo,

You simply have to connect PHD2 Mount to POTH Hub, NOT ES_PMC8.Telescope

Hope that helps
--
Jerry Hubbell
Vice President of Engineering

Explore Scientific, LLC.
jrh at explorescientific.com

www.explorescientificusa.com
1010 S. 48th Street
Springdale, AR 72762
1-866-252-3811

Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
             Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home


Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Wilderness, VA
Mounts
: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras:  QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating

Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!


locked Re: #iEXOS-100 crooked pulley gear #iEXOS-100

Tyler Bowman - Explore Scientific Customer Service <Tbowman@...>
 

i sent you a email Salvo. if you could respond that way we can resolve this issue. 

do you have any guiding logs at all that will help me better determine what's going on.

even my mount has PEC as well and with guiding you can over come the pec within the mount. 

1621 - 1640 of 9972