Thank you Jerry, let me explain my situation. I really wanted this mount but it was not in stock and it will not be in stock till May-June(checked with ES Aria Boroojeni - Customer Service). But sudde

#EXOS2 #pmc-eight

HI Peter, I just sent you an email responding to your issue. I would suggest that instead of you trying to restore the configuration of the RN-131 module and risk additional damage, you should send yo

#EXOS2 #pmc-eight

Hi Wes, I have some experience, I was a IT technician for a "fruit" company few years ago so I think I can do it. I understand the whole process of setting the parameters, I was doing that when it hap

#EXOS2 #pmc-eight

Peter: Assuming the wifi module is not damaged, you are going to be ok. After reset of the wifi board, you do have to go through the reconfiguration manually. I have been all over it many times, but h

#EXOS2 #pmc-eight

Regarding the Poth vs Device hub I was not able to make serial connection longer than few seconds.... just for eeprom upload or COM check. After that there is no serial connection. And without the WIF

#EXOS2 #pmc-eight

Hi Tyler, there was a development since my first post. I was able to establish a stable connection with the PUTTY telnet so I decided to do a factory reset as described in the manual(I'm frustrated af

#EXOS2 #pmc-eight

What are the lights going on the side of the PMC-Eight especially on the wifi portion of the testing on the wifi selection I'm curious to know how many other wifi devices your running on the same chan

#EXOS2 #pmc-eight

I'm a happy new owner of the EXOS2 PMC-8 mount but I was not able to use it since I received it. I was trying to get it to work reading all the topics here but I have not found the solution for my pro

#EXOS2 #pmc-eight

Terry Download the configuration manager from the Es website. Install that and give it a go. Wes

#EXOS2 #ASCOM

Got to be a dumb question but how do I bring up that Wifi configuration box as above? I have installed the ES_PMC8 setup.exe on my Windows 10 laptop but cannot find how to configure to WiFi tcp/ip as

#EXOS2 #ASCOM

Parag - Check out PointCraft for plate solving in APT. There are a number of YouTube videos that go into great detail on how to use and customize it. You’ll definitely want to plate solve if a meridia

#ASCOM #EXOS2

Parag There is no way to prevent the flip if your Astro program insists on dithering near the meridian. Nina will pause imaging at a time before flip. I guess planning is the only thing you can do As

#ASCOM #EXOS2

Wes, Thank you. A couple of questions: 1) Is there a way to delay this behavior? 2) What could have caused my target not within my FOV after the flip? If after the flip my target would have remained c

#ASCOM #EXOS2

Parag When the dither happened the new commanded position was likely beyond meridian. This resulted in a meridian flip. Any goto that has a location across the meridian will generate a flip. The mount

#ASCOM #EXOS2

I was doing an imaging session last night and experienced an automatic meridian flip. I was using APT, ASCOM with my iEXOS-100 and a Nikon D7200. I did not have APT configured for automatic meridian f

#ASCOM #EXOS2

Hi Jerry, Your point makes totally sense. Just as a reference point for a new Exos2 owner, what would you consider a good range for polar alignment offset? Anything as large as to avoid field rotation

#EXOS2

Hi Bob, I agree with you in terms of DEC guiding. In fact I go much further in my assessment. The following may go against the conventional wisdom a little bit and impacts the need for a precise polar

#EXOS2

Charles, This is re: DEC guiding? I touch on this a bit in my tuning doc. About the best you can do for DEC balance is a bit of camera-heavy bias with a refractor, but that DEC motor on the side will

#EXOS2

I was wondering if anyone knew how to improve movement in the dec. It doesn’t seem smooth and hard to balance. There’s also a slight Hang up when you rotate. Which I think is normal from the design. I

#EXOS2

Dino Also there are many who are using the asi air. They post and reply on the applications subgroup. So if you get stuck with the asi air post there. Those guys know what to do. The rest of us maybe

#EXOS2