Hi Wes, Thought configuration manager and Tcp was for wired serial connection

#TECHNICAL #ExploreScientific #iEXOS-100

Hello all, when I try to connect the ascom wireless (not hardwired) and using Poth I click on connect, the mount lights come on red/green, then nothing. there is no data transferred. I then get a erro

#iEXOS-100 #TECHNICAL

Paul. To review 1. Unit works fine with Explorestars ...if so this checks the box for the mount wifi 2. Ascom platform installed and runs all it's tests without error....if so this checks the box on t

#iEXOS-100 #TECHNICAL

Hi Wes, I think you hit the nail on the head with the comment about selecting TCP. The iEXOS 100 does not provide a connection to TCP/IP and UDP/IP concurrently like the G11 and EXOS 2 because the ESP

#iEXOS-100 #TECHNICAL

Hi Guys thanks for your help, I do appreciate it. Is the configuration manager in the files section, do I need to plug in a usb cable to use config manager. Than you

#iEXOS-100 #TECHNICAL

Paul It is in files section of main. It is under user contributed. As for needing a serial. Sadly it seems so. I just tried it with no serial connection, just wifi and no soap. Wes

#iEXOS-100 #TECHNICAL

Paul....wait. Turns out that config manager reports a fail when you try to query the comms method when no serial port is attached. But if the status line at bottom of window shows wifi on PMC8 then yo

#iEXOS-100 #TECHNICAL

Paul Hang on again. Perhaps you can switch to TCP by using the ESY! Command. This command seems to work. Send it with your radio button set to udp., Which is what mode the iexos is in if Explorestars

#iEXOS-100 #TECHNICAL

Well...I place my order for a new 102mm FCD-100....it should be here next week. My NA nebula sequence just started...I'm on 1 of 104...guided...180 seconds each. Time for bed. Chris IEXOS-100 Canon 40

#iEXOS-100

It was a good night...PlateSolving....wow...SO much easier to aim with this figured out and the connection back to Stellarium…..simply awesome....I was still off by a couple hundred million miles it w

#iEXOS-100

Looks great Chris!

#iEXOS-100

I have updated the video to include the section to download, install, and use Chris Moses' PMC-Eight Configuration Manager to change the network protocol from UDP/IP to TCP/IP which is required for th

#ExploreScientific #iEXOS-100

Hi, Thank you for updated video, I appreciate it very much. Wii try this as per instructions. If I want too switch back to using just explore stars , I assume you switch from TCP back to UDP/IP using

#ExploreScientific #iEXOS-100

Hi Jerry, I glad to inform you I have everything working now, thanks to your video. well done I even got it connected to Skymap Pro, and older program. If I do a 2 star alignment using explore stars t

#ExploreScientific #iEXOS-100

Paul Unfortunately ascom knows nothing about an Explorestars alignment. All alignment data is stored and used only by exorestars. The data also is no good even for explorestars once you move the mount

#ExploreScientific #iEXOS-100

Paul Yes when you want to go back to exorestars (for iexos100) you would use the configuration manager to set the link to UDP. Wes

#ExploreScientific #iEXOS-100

Hello Wes, Thank you for the info

#ExploreScientific #iEXOS-100

Seeing as the weather has been absolute garbage, figured I'd design an adapter for the iExos100 and the iOptron CEM25P adapter plate that attaches to the iOptron TriPier...

#iEXOS-100

Jim Sooooo nice. Think you could design one for the exos2? That pier is the cat's meow. Wes

#iEXOS-100

I probably could...send me a few pics of the top of the exos2 mount with the dimensions and I will see what I can come up with.

#iEXOS-100