Rene Don't know. Will find out. Probably not. Wes

#iEXOS-100

Hi Rene This just something that you might want to do if your are using windows with German language, try change it to English.

#iEXOS-100

Good tomorrow all together ... The program pcm-eight interface utility shows ... testing wi-fi interface ------------------------------------ W-fi connection not fond testing com port testing com3 Pmc

#iEXOS-100

If I plug the serial cable, windows has an error message ... FT232R USB UART (no drivers found, can't be started)

#iEXOS-100

Rene 1. Please send me a pic of the iPad screen when you press menu/settings. 2. You might have to load a driver from the vendor for your serial port. What happened? I thought serial was working yeste

#iEXOS-100

sooo, I can now go to udp ... And the app with ipad goes ... Don't ask me how I made it ... Thanks to everyone who helped me And now it's raining in old germany ...

#iEXOS-100

"North American Nebula" Shot under Seattle Bortle 8 skies 7, 90 sec exposures unguided 10 Darks, Flats and Bias. ISO 1600 Canon T6i Full Spectrum Mod L-Pro Filter used Williams Z-61 Scope Mount iEXOS-

#iEXOS-100

@jim did you use a reducer? Sent from Mail for Windows 10

#iEXOS-100

Great....Here is my North America nebula....I am still trying to figure out Field of View... your Z61 is 360 * 1.6 for the APSC sensor effective FL of 576? Canon T5i – unmodified. ISO 800 – 30X 180sec

#G11 #astrophotography #iEXOS-100 #EXOS2

You can calculate your field of view based on some of your systems specs. If you know your camera's ccd pixel size, and resolution, and your focal length, then you can calculate the FOV directly: Plat

#G11 #astrophotography #iEXOS-100 #EXOS2

The issues I'm having are many. First, polar alignment is next to impossible looking through that tiny hole. Which makes it nearly impossible to do any star alignment. Ive tried connecting it to my la

#ExploreScientific #iEXOS-100

I have been running my 100 on ASCOM from the start. I tried Explore Stars once and it was ok, but I was after the remote control experience. Converting it off wireless to USB was tricky. You have to f

#ExploreScientific #iEXOS-100

Chris, I also had an issue with the left/right movement in regards to the knob under the mount not tightening enough. The bolt/knob is bottoming out in the mount housing, thus not permitting a tight f

#ExploreScientific #iEXOS-100

Harry can you tell me the order of items on the bolt? Mine came off by accident, I got them on again but have noticed that left/right movement also. Mark Pastor Mark Pastor Photography www.markpastorp

#ExploreScientific #iEXOS-100

Shadowed_in-fear Setting up serial can be, as Chris notes, a bit tricky, but it need not be so if you use the Parallax usb-serial adapter that can be purchased from Parallax. Also, forget all the stuf

#ExploreScientific #iEXOS-100

Mark, unfortunately I am away from home on vacation, and will not be back to the mount for about 3 weeks. Here is what I think I remember. Knob, flat washer, “spring clips/washers, flat washer, bottom

#ExploreScientific #iEXOS-100

Harry is correct: washer, wavy washer, washer. Harry sounds like you put the extra washer on top of the mounting plate, rather than under it with the other washers. Correct? Kent Marts Customer Servic

#ExploreScientific #iEXOS-100

Yes Kent, that is correct. I removed the existing small retaining clip that held the bolt assembly in the bottom of the mount, added the new washer, and had to replace the retaining clip with one with

#ExploreScientific #iEXOS-100

Shadowed_in_fear As for aligning, yes the EXOS100 has an inoperable (for me) hole instead of a guide scope. Its just the way it is. You can approach fixing this in a couple of ways: 1. If you attach a

#ExploreScientific #iEXOS-100

Thank you Harry. Mark Pastor Mark Pastor Photography www.markpastorphotography.smugmug.com 630-913-7495

#ExploreScientific #iEXOS-100