No Problem, based on your Device Manager information, I was going to suggest you go to the FTDI website to get the latest driver https://www.ftdichip.com/FTDrivers.htm I am glad you got it working

#iEXOS-100

Hi JR, Thank you for your questions. I will try and answer them in order 1) New button to display objects near where the telescope is pointed (OBS button) Question: Does this mean, when you are doing

#ExploreScientific #iEXOS-100 #G11 #EXOS2 #TECHNICAL

Hi Tim, With the latest version of the Configuration Manager, it has never been easier to update the firmware on your PMC-Eight System. Its literally 3 steps 1) Start the version 1.0.3 version of the

#G11 #EXOS2 #OpenGOTO #ExploreScientific #iEXOS-100

Fellas Chris and I did some extensive troubleshooting and we were both stumped. I happen to own an EXOS-2 and as a last resort and I was able to successfully update the FW on that box with the DTech c

#ExploreScientific #G11 #EXOS2 #iEXOS-100

Responding to astof's comments: Allow me to inform you, that I find it low standards from the company Explore Scientific to distribute programs with Trojan virus. Søren Toft Denmark A few comments 1.

#EXOS2 #iEXOS-100 #TECHNICAL #ExploreScientific #G11

Chris, That set screw is M3x0.5. I checked the drawings to verify. Kent Marts Customer Service Explore Scientific

#iEXOS-100

Hi Bob, I really don't expect much difference as far as the motor current increase from 600 mA to 700 mA as far as any smoothing action is concerned. It is about a 15% increase in torque which is alwa

#ExploreScientific #G11 #EXOS2 #iEXOS-100 #TECHNICAL

Re: Flatteners... I'd asked for some advice on that subject, over on CloudyNights. I think I've pushed the exercise about as far as it's practical and I've just updated the thread. If you're intereste

#iEXOS-100

Taking a stab at things Chris. Currently, I am imaging planets, but I came across an article that might be of assistance to you regarding your Explore Scientific 102mm FCD-100, where they discuss some

#iEXOS-100

Joe, The file is over in mounts/files: https://espmc-eight.groups.io/g/MOUNTS/files/EXOS2PMC8_TuningNotes_v1.pdf

#iEXOS-100

Julian You are in good hands...Those of Bob et. al. I had to reduce the diameter by filing a flat on the motor case mounting screw boss to keep it from scraping the belt (RA only). That was needed bec

#iEXOS-100

Hi ya...that was me with the ES 102mm FCD-100....I am using a small guide scope, dlsr and I am way (way) over the weight capacity. It holds up like a champ, but my success should not be the standard I

#iEXOS-100

As always, many thanks for your advise guys. I did think this was not the easiest of questions to answer definitively!!!! The easiest first step for me I think is to down adjust the pixel size on my e

#iEXOS-100

I really don't appreciate your threats to go back to Amex and OPT to get a full refund without you demonstrating an ounce of due diligence to get your system working. I don't really know what you woul

#TECHNICAL #iEXOS-100

Thanks Kent I just ordered 2 weights. Can't wait to try them out and to test my mount again now that it is put back together. Mark Pastor Mark Pastor Photography www.markpastorphotography.smugmug.com

#iEXOS-100

I have added links on the Explore Scientific PMC-Eight Software and Downloads page for the PMC-Eight Configuration Manager developed by Chris Moses, and the PMC8 Utility tool developed by T.Wesley Eri

#ExploreScientific #G11 #EXOS2 #iEXOS-100

Thanks Jim. Can't wait to see the PHD logs to relate them to the subjective evaluation of the image. Wes.

#iEXOS-100

Thank you, Amanda, for the shoutout. People like you are the reason we're doing it. For the technical members here, please feel free to frequent this subgroup to share your knowledge -- but try hard t

#iEXOS-100

I probably could...send me a few pics of the top of the exos2 mount with the dimensions and I will see what I can come up with.

#iEXOS-100

Looks great Chris!

#iEXOS-100