Hi Steve, Others have identified the issues with certain tablets running ExploreStars that doesn't show up when you load it up on a PC where the default rate is initially set to 53.00 instead of 53.32

The difference of 53.33 and 53.32 is the difference between the nominal calculated rate and the actual rate based on the firmware resolution. Since I use integers in the firmware for setting precision

Hi Chris, Yes the driver supports MoveAxis commands. If you connect the mount to the ASCOM POTH you can use the hand control there to demonstrate to yourself that it works. You can set the jog amount

Hi Chris, I am curious to see how accurate most users are getting with the raw pointing of the G11 with an accurate polar alignment via the Polemaster or equivalent, but I can give you some insight in

Hi Lynn, It was great seeing you at NEAF again this year. It's good to see you on the forum. I will be ordering your book so I will sign that for you and get it out to you soon. Thanks again for your

Hi Jenya, Thanks Cyril for helping out, I have been away this past week. Jenya, if you look closely at the directory structure shown after step 2 on the installation instructions here http://www.explo

I will be traveling starting on Tuesday, April 17th to New York to take a couple of days off and attend the North East Astronomy Forum 2018 in Suffern, NY. http://www.rocklandastronomy.com/neaf.html I

Hi Steve! Greg told me that you are going to NEAF, I look forward to meeting you there next week. Thanks Bob for forwarding that link. Yes, if you can run KitKat or later, then it should be good. Than

This is my second attempt to post this response. Jeremy, What you have described are mount position limits, which have been around since the beginning. Mount limits are not part of the original ASCOM

Hi Mike, These options are typically provided in the ASCOM Client program, not in the driver. Jeremy's suggested behaviour would be a one time selection in the driver dialog box, which typically is no

This is try number two to respond to Jeremy. This is getting to be a PITA with the group. Hi Jeremy, The driver is designed for the user to be able to track past the meridian if he chooses and then it

Look under More in the menu and you will find them Jerry Hubbell Director Electrical Engineering Explore Scientific, LLC.

Hi David, I am guilty as charged also... I apologize, I should be setting a better example here. I will make an effort to update the subject line as we talked about before, and I said I was going to d

Hi Jeremy, I was under the impression you had been using this program, I am very well aware of it, and it is very useful of course! I have been using it to look at your log files all along, I thought

Hi Bob, Thanks for your message. See my comments below in RED Jerry Hubbell Director Electrical Engineering Explore Scientific, LLC. ---In ESPMC-Eight@..., <r_hoskin@...> wrote : Jer

If you haven't already, I would very much appreciate you taking the 2 open polls I have running now about the ASCOMPAD gamepad interface, and the ExploreStars Android Application. https://groups.yahoo

Hi David, I think the software that our technical writer uses puts the month/year at the bottom of each section of the manual when it is changed. Apparently each section is a separate file that is com

I have updated the Android version of the ExploreStars application on our website, available here: http://www.explorescientific.com/pmc-eight/Android.html IF YOU HAVE ALREADY INSTALLED THE APPLICATION

I have uploaded to the files section the latest PMC-Eight User Manual. It is also available on the Explore Scientific USA website here: https://explorescientificusa.com/pages/explore-documents A new L

Hi Jeremy, I think that what you have there is reasonable for a DSLR image stack. Take a look at this recent M82 image from Jack Newton using the Explore Scientific 165 FCD100 ED APO Carbon Fiber scop