Hello, To clarify, my 3D printable PoleMaster Mount uses the adapter that comes with the standard PoleMaster system. Nothing else is needed. https://www.thingiverse.com/thing:4694356 iEXOS-100 PoleMas

#iEXOS-100 #polaralignment

Hi, my balance was good on ra and dec, and I think the mount was pretty leveled too. Can you use sharpcap even if your entire north pole is obstructed, because in my backyard, forest obstructs the who

#iEXOS-100 #polaralignment #tracking #ASCOM

I have locked this thread. Please move this discussion to the PMC-Eight Applications subgroup. All the other groups are for PMC-Eight discussions only. See item 8 in the Forum Terms of Service. https:

#iEXOS-100 #polaralignment #alignment #Off-Topic

Hi Mick, As far as I can see polarscope can be calibrated tho ways: 1. focusing distance, whole reticle unit screws in on polarscope tube to have reticle focused the same time as stars. 2. there are 3

#polaralignment

Dear Lloyd, unfortunately when I can take my iExos 100 this night the sky was covered thus I cannot take no pics, but as U suggested, as I turned the dec axis for 90 degrees the tunnel opened :-D Than

#polaralignment #pmc-eight #iEXOS-100

Mines on the exos-2 is the same , No clock face like the pics you posted,,,that's what I'm used to on my old CG4 mount,,now it just has 4 stars & a place for polaris...I'll get used to it,, just diffe

#polaralignment #iEXOS-100

Hi, I recently purchased the iexos-100 and am trying to find a reliable way to mount my polar scope. I've already tried mounting it to the lower control box by 3d printing an adapter, removing the two

#iEXOS-100 #polaralignment

Hi Adam, your set up is the same as mine. I have just, I think, mastered the Polar Scope, here is my modus operandi; 1. Remove camera to help ease of viewing through the PS 2. Make sure your mount is

#polaralignment #iEXOS-100

Brian Hehe sorry I didn’t mean to offend you. Yes the polar scope must be collimated to the ra axis of the mount. It is necessary for its line of sight to be a true indicator of the ra axis pointing..

#astrophotography #goto #iEXOS-100 #polaralignment

Thank you for the answer! I will try to contact Rodrigo. Thanks!

#alignment #EXOS2 #ExploreStars #polaralignment

Hi Wes, They where taken with a 18-200 lens. The one with the trails on 200mm the other one on 18mm. However i dont think thats the problem, because i also took pictures on 200mm on the side where the

#polaralignment #astrophotography #ExploreStars #iEXOS-100

Hi Kent, Sorry for the late response on this thread as I've been away. Yes, there were instructions included, as well as the two oversized nuts that Pavel mentioned that I also took to be used as wash

#iEXOS-100 #polaralignment

Hi Joe, There are errors in all of these items that combine to cause the overall offset, plus others. Unfortunately even though we can add the precision PMC-Eight electronics and all the software avai

#polaralignment #EXOS2 #ExploreStars

I expected something like that but i dont even know if the dovetail on my OTA can be adjusted. Can i just unlock the DEC and RA axes and move the scope until polaris is in my the FOV? Yes, its 5.5x2.1

#polaralignment #alignment

Good news Tim.

#polaralignment #EXOS2

Hi Nihar, The PMC-Eight controller on power up sets the motor counts to zero internally in the firmware. This is reasonable because there is no assumption that the mount's physical clutches have not b

#alignment #astrophotography #polaralignment

By the way,I comored the arrows with a silver sharpie, they look great.

#EXOS2 #polaralignment

Yes I’m using iOS, thanks.

#EXOS2 #polaralignment #TECHNICAL

Using the supplied password why won’t the PMC8 connect ????

#TECHNICAL #polaralignment