Thanks Wayne, I can confirm I have re-installed the POTH hub successfully, and reintegrated it into my workflow. All apps are communicating with the mount again. cheers,

#FIRMWARE

Thanks Jerry, I appreciate your response and guidance. cheers,

#FIRMWARE

Good Morning, First, thank your Jerry and Wes for your work on the new Firmware. I have successfully updated my firmware, and using the new contig tool, updated my PMC8. My previous workflow to image

#FIRMWARE

Yes, I currently use the 80mm now, with no issues, and have considered the 102mm. While I was in the market, I thought "why not" to the 127mm. I have duly noted your comments and appreciate that.

#ASCOM #cal-notice #CloudyNights #EXOS2 #ExploreStars

Would anyone have any experience to share regarding the use of the ES ED127mm Triplet and this ES EXOS2 mount. The scope with accessories list at 22lbs, and want to ensure if this would be able to han

#ASCOM #cal-notice #CloudyNights #EXOS2 #ExploreStars

M81-M82 with 5 1/2 hours total integration time. Cropped. Guided using PHD2 Polar Align, Plate Solve and Image acquisition done with Sharpcap 3x Drizzle during stacking with DeepSky Stacker ZWO 183MC

#G11 #astrophotography #iEXOS-100 #EXOS2

Thanks for your reply Wes, When in my backyard, the slewing noise is fine, I am thinking about when I'm in a campground, with close neighbors, slowing the slew speed down would reduce the whiling nois

#ASCOM #EXOS2

Good Afternoon, Using the PMC* connected via \serial, and slewing commands sent by Stellarium, I am trying to adjust the slewing speed a bit slower. Using the ASCOM Profiler, I simply cannot find the

#ASCOM #EXOS2

#G11 #astrophotography #iEXOS-100 #EXOS2

#alignment #ASCOM #EXOS2

Good Morning, I wanted to share my excitement to have everything working together, with the great assistance from you all here. Using my EXOSII-PMC8 mount with my Starwave 80ED scope, I was able to ca

#alignment #ASCOM #EXOS2

Thanks for your quick reply Jerry. I noticed that I did not provide the link. Based on what I have read, this would work,so I was looking for confirmation which you supplied. Thank you. The cable is h

#ASCOM

Good Morning, and I really enjoyed the great discussion on guiding over wifi. This has caused me to reflect and look at getting a serial connection rather than wifi when guiding. Would this cable work

#ASCOM

I recognize and can appreciate the concern regarding ST4 legacy guiding, but really the direction is ASCOM (Pulse) guiding. The benefits with this strategy has been discussed all over.

#EXOS2

Ah, with a bit of help from vise grips I was able to remove it. Not so tight next time. Thanks

Okay, new owner of a EXOS-PMC8 mount. I have threaded he bar to secure the mount to the tripod, but I think I missed the step where it should be aligned for alignment. In any event, I need to remove t

@Travis and @Tim, ah, thanks, That makes sense.

Hi Folks, Just received my new ES Mount, and while balancing it, noticed that the polar park position, the internal mount obscurs the viewing through the polar scope. Can anyone suggest what I am doin