|
Yet another 3d printed Azimuth adjuster for iEXOS-100
In addition the design in this post, i have had a modified version with great built-in strength up on thingiverse for some time now. This link has multiple parts for the IEXOS-100 including laser moun
|
In addition the design in this post, i have had a modified version with great built-in strength up on thingiverse for some time now. This link has multiple parts for the IEXOS-100 including laser moun
|
By
Alex Z.
· #12089
·
|
|
#iEXOS-100
#iEXOS-100
Hello, I have uploaded few 3D printed parts for the IEXOS-100 to thingiverse. They include an updated azimuth adjuster as well as laser holder mount for polar aligning...link here: https://www.youtube
|
Hello, I have uploaded few 3D printed parts for the IEXOS-100 to thingiverse. They include an updated azimuth adjuster as well as laser holder mount for polar aligning...link here: https://www.youtube
|
By
Alex Z.
· #11927
·
|
|
"Access to COM port denied" error (Serial ASCOM) iEXOS-100
#iEXOS-100
#ASCOM
As a baseline you should have the latest firmware installed. Assuming you do, there is nothing finicky about the mount. In my experience it is bullet proof and punches way above its weight. It sounds
|
As a baseline you should have the latest firmware installed. Assuming you do, there is nothing finicky about the mount. In my experience it is bullet proof and punches way above its weight. It sounds
|
By
Alex Z.
· #11164
·
|
|
PolarFinder & adapter
#iEXOS-100
#polaralignment
Hello, To clarify, my 3D printable PoleMaster Mount uses the adapter that comes with the standard PoleMaster system. Nothing else is needed. https://www.thingiverse.com/thing:4694356 iEXOS-100 PoleMas
|
Hello, To clarify, my 3D printable PoleMaster Mount uses the adapter that comes with the standard PoleMaster system. Nothing else is needed. https://www.thingiverse.com/thing:4694356 iEXOS-100 PoleMas
|
By
Alex Z.
· #10686
·
|
|
Problem Downloading
#iEXOS-100
Re-install Ascom 6.5. At the first screen click the dropdown "out of date hubs replaced by device hub" and select "entire feature will be installed to local hard drive". to keep things simple, that wi
|
Re-install Ascom 6.5. At the first screen click the dropdown "out of date hubs replaced by device hub" and select "entire feature will be installed to local hard drive". to keep things simple, that wi
|
By
Alex Z.
· #10615
·
|
|
modify pole Master adapter for I exos 100
Great job! FYI, I made a 3D printable PoleMaster mount a while back, free for all to download and print or have a printing service do it. https://www.youtube.com/watch?v=2Jrp-Kv7I1M&t=17s Alex Zarvis
|
Great job! FYI, I made a 3D printable PoleMaster mount a while back, free for all to download and print or have a printing service do it. https://www.youtube.com/watch?v=2Jrp-Kv7I1M&t=17s Alex Zarvis
|
By
Alex Z.
· #10581
·
|
|
iEXOS-100 3D Printed 'Pole Master' Mount
Hello fellow iEXOS-100 mount owners, I created a snap-in 'Pole Master' mount for the iEXOS-100. I offer it as a humble gift to the community. Happy Holidays!! You can find more information here: https
|
Hello fellow iEXOS-100 mount owners, I created a snap-in 'Pole Master' mount for the iEXOS-100. I offer it as a humble gift to the community. Happy Holidays!! You can find more information here: https
|
By
Alex Z.
· #9107
·
|
|
Is FT_PROG inversion needed for Stellarmate
#iEXOS-100
I also have an iEXOS-100. Per Jerry's past answer, I Inverted mine. Worked great. I use Astroberry (similar to Stellarmate). Alex Z.
|
I also have an iEXOS-100. Per Jerry's past answer, I Inverted mine. Worked great. I use Astroberry (similar to Stellarmate). Alex Z.
|
By
Alex Z.
· #9071
·
|
|
iexos-100 beginner comments (Mac user)
#iEXOS-100
#iPadOS
#FIRMWARE
Mirko, Thanks for the screenshot, I knew it was there but didn't have it in front of me, nor do I shoot Nikon. My understanding of the IEXOS-100 is that the FTDI Serial component is built into the mou
|
Mirko, Thanks for the screenshot, I knew it was there but didn't have it in front of me, nor do I shoot Nikon. My understanding of the IEXOS-100 is that the FTDI Serial component is built into the mou
|
By
Alex Z.
· #8957
·
|
|
iexos-100 beginner comments (Mac user)
#iEXOS-100
#iPadOS
#FIRMWARE
Well, I can't speak to Nikon support in Kstars, most DSLR support is there and works. But likely this is your problem with the IEXOS 100 mount and using an USB cable: "For IEXOS 100 mount control usin
|
Well, I can't speak to Nikon support in Kstars, most DSLR support is there and works. But likely this is your problem with the IEXOS 100 mount and using an USB cable: "For IEXOS 100 mount control usin
|
By
Alex Z.
· #8955
·
|
|
locked
3D Printed Parts and How to use IEXOS-100 with the free Astroberry Server software
#iEXOS-100
#Off-Topic
Hello IEXOS users, In my never-ending pursuit of a lighter more advanced setup, I recently purchased an ES IEXOS100 EQ mount. I struggled with learning how to control it working through all the method
|
Hello IEXOS users, In my never-ending pursuit of a lighter more advanced setup, I recently purchased an ES IEXOS100 EQ mount. I struggled with learning how to control it working through all the method
|
By
Alex Z.
· #8929
·
|
