RESEND: ANNOUNCEMENT - UPDATED Universal Firmware Installation Kit 20A01.1 2021-08-08 #ExploreScientific #ASCOM #FIRMWARE #UFCT
Jerry Hubbell - Explore Scientific VP Engineering
It is my pleasure to announce the release of the Updated Universal Firmware Installation Kit which includes updated versions of the Universal Firmware Configuration Tool (UFCT) and the PMC-Eight ASCOM Driver which takes advantage of all the new functions added to the firmware over the past few months.
I want to thank Wes McDonald for his tireless work on this release to make the PMC-Eight the best mount control system available.
You can find the kit in the files section of the main forum or you can find it here for download on our website.
ExploreStars Software & Database Downloads – PMC-Eight System Download — Explore Scientific LLC
Thanks for your continued support of the PMC-Eight system!
Vice President of Engineering
Explore Scientific, LLC.
jrh at explorescientific.com
1010 S. 48th Street
Springdale, AR 72762
Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home
Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Mounts: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras: QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating
Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!
toggle quoted messageShow quoted text
Fantastic Jerry and Wes! Looking forward to receiving and testing my new EXOS2 with PMC8 in a few weeks 😊 Clear Skies! Cameron
From: MAIN@ESPMC-Eight.groups.io <MAIN@ESPMC-Eight.groups.io> On Behalf Of Jerry Hubbell - Explore Scientific VP Engineering
Sent: Friday, August 13, 2021 7:10 AM
Subject: [Special] [ESPMC-Eight] RESEND: ANNOUNCEMENT - UPDATED Universal Firmware Installation Kit 20A01.1 2021-08-08 #ExploreScientific #FIRMWARE #ASCOM #UFCT
I am pleased to report that the new FW and new ASCOM driver worked great for me last night with my G-11. The UFCT would not let me change the mount to G-11 from iExos-100. It would select G-11 and my COM port and click Get My Current Configuration and it would revert to iExos-100 and tell me to either select Exos-2 or G-11. I bypassed it by clicking Set Current Configuration and then it would let me change the mount to G-11. The other thing I noticed in the UFCT is that Northern Hemisphere was not checked by default. Not sure if this was intentional or not. I did not notice it at first and was scratching my head trying to figure out why my mount was slewing towards the ground. I did not have any issues with PHD2 guide pulses stopping. Was able to guide my entire session. The last thing I noticed is that I when I slewed the mount to my target my orientation from Stellarium was not taken into account. Other than that a drastic improvement compared to my last time out. Now I have to do the same thing for my Exos-2 and iExos-100.
The correct procedure after update is to set current configuration after selecting g11. So you did that!
As for the northern hemisphere I think this is a consequence of this not being a new install. So useful tip for everyone is likely to be to ensure the northern hemisphere is selected upon initial setup of the new firmware with the UFCT.
So glad to hear all went well.
Wes, Southport NC
EXos2-GT PMC-8, iExos 100
ES ED 127, 10" LX200GPS+wedge, Astro-Tech 8" Newt, ETX-90, 60mm no-name guide scope ~ 260mm FL
Polemaster, Orion ST-80 and SAG, ZWO 290MM, D5300 astro modified
Nina, Bootcamped Mac Mini control computer, RDP to iMAC
110 amp hour lead acid deep discharge battery for field power
Electrical Engineer, Retired