Clarified UFCT Instructions To Correct Startup Issue #ExploreScientific #UFCT


Jerry Hubbell - Explore Scientific VP Engineering
 

I updated the Universal Firmware Configuration Tool to clarify the instructions to correct a startup problem that you may encounter if you startup the UFCT prior to connecting to and powering up your PMC-Eight system. Now with the new UFCT version 1.0.B 2021-04-24 (Available in the installation kit in the files section) It will show a Message Box shown here warning you to connect to and power up the PMC-Eight prior to starting the UFCT, The issue is that the PMC-Eight COM Port will not show up in the UFCT if you connect to it AFTER starting the program.



When you hit OK, it will show the normal application form:



I have circled the changed areas in RED.  Note the addition of the RESTART UFCT button to facilitate restarting the program after connecting and powering up the PMC-Eight. After you restart the UFCT, the COM Port for your PMC-Eight should now show up in the COM Port dropdown listbox.

Hopefully this will clear up any confusion caused by the incorrect instructions on the previous version. I apologize for any inconvenience.
--
Jerry Hubbell
Vice President of Engineering

Explore Scientific, LLC.
jrh at explorescientific.com

www.explorescientificusa.com
1010 S. 48th Street
Springdale, AR 72762
1-866-252-3811

Author: Scientific Astrophotography: How Amateurs Can Generate and Use Professional Imaging Data
             Remote Observatories for Amateur Astronomers: Using High-Powered Telescopes From Home


Mark Slade Remote Observatory (MSRO) IAU MPC W54 Equipment
Wilderness, VA
Mounts
: ES PMC-Eight G11 + Telescope Drive Master (TDM)
Scopes: ES 165 FPL-53 ED APO CF, ES 102 FCD100 ED APO CF
Cameras:  QHY174M-GPS + FW, QHY163C
Misc: 3-inch 0.7x Focal Reducer Field Flattener, Filters: Luminance,
Red, V-band Photometric, Diffuser, 200 lpmm Spectral Grating

Software: MaxIm DL 6, Cartes du Ciel, Astrometrica, AstroImageJ, AutoStakkert!